Nachricht

May 25, 2024

Residential Heating Showcase 2014: Hersteller bringen diesen Herbst die Hitze

AirEase Modell A962V Ofen Amana Modell ASZC18 Wärmepumpe Amana Modell A_VM97 Ofen American Standard Heating & Air Conditioning Modell Platinum 18 Wärmepumpe Arcoaire Modell F9MXT Ofen Arcoaire Modell

AirEase model A962V furnace

Amana model ASZC18 heat pump

Amana model A_VM97 furnace

American Standard Heating & Air Conditioning model Platinum 18 heat pump

Arcoaire model F9MXT furnace

Arcoaire model N9MSB furnace

Armstrong Air model A962V furnace

Bard model Geo-Delta geothermal heat pump

Bosch model Greenstar gas condensing boilers

Bosch model Greensource CDi Series SM split system geothermal heat pump

Broan model FG7TC/L-VS furnace

Broan model R8HE-A package gas/electric unit

Bryant model Evolution V Heat Pump, Model 288BNV heat pump

Bryant model Preferred™ Series Plus 96 furnace, Model 926T

Carrier model Infinity® 18VS variable-speed heat pump (25VNA8)

Carrier model Infinity 98 gas furnace with Greenspeed® Intelligence (59MN7)

Century model GUH95S furnace

Century model TGRG Series package unit

ClimateMaster model Tranquility® 30 Digital Series geothermal heat pump

ClimateMaster model Trilogy™ 45 Q-Mode geothermal heat pump

Coleman model Echelon™ DHPM ductless mini-split heat pump

Coleman model LX Series TM9V, TM8V, and TMLV gas furnaces

Comfort-Aire model HRG14 Series heat pump

Comfort-Aire model VMH-SD Series ductless mini-split heat pump

Comfortmaker model G9MAE furnace

Comfortmaker model PHR5 package heat pump

Daikin model DZ18TC heat pump

Daikin model D_97MC furnace

Day & Night model G9MXE furnace

Day & Night model PGR5 package gas/electric unit

Dunkirk Boilers model DWB boiler

EarthLinked Technologies model SC, SD, SCW 018-068 geothermal heat pump

Friedrich model J Series, ductless, 24,000-Btu, multizone wall-mounted heat pumps

Friedrich model J Series, ductless, single zone heat pump (HM12YJ)

Frigidaire model FT4BE heat pump

Frigidaire model R8HE-A package gas/electric unit

GeoComfort model Cold Climate Series, geothermal vertical package unit with hot water generation

GeoComfort model Compass Series geothermal heat pump, outdoor split system with hot water generation

GeoStar model Aston Series geothermal heat pump

Goodman Mfg. Co. model DSZC18 heat pump

Goodman Mfg. Co. model G_VM97 furnace

Haier model Professional Series ductless mini-split

Halcyon model System 9RLFFH split system

Heil model G9MAE furnace

Heil model PGR5 package gas/electric unit

Hydron Module model HWS/HWD water-to-water geothermal heat pump

Hydron Module model Revolution Series geothermal heat pump, outdoor split system with hot water generation

Laars Heating Systems model Mascot LX combination boiler and tankless water heater

Lennox Industries model Dave Lennox Signature Collection oil furnace, SLO185V and SLO185VUF79/105V42

LG Electronics Inc. model Standard single zone inverter duct-free split system (LS307HV3)

Lochinvar model FTXL™ fire tube boiler (FTX)

Luxaire model Acclimate™ DHPM Ductless Mini-Split Heat Pump

Luxaire model LX Series TM9V, TM8V, and TMLV gas furnaces

Marley Engineered Products model COS-E electric fan-forced wall heater

Maytag model PPG3HE-A package gas/electric unit

Maytag model PSH4BE heat pump

Mitsubishi Electric US Cooling & Heating Division model Hyper-Heating Inverter™ (H2i®) single-zone heat pump system (MUZ-FH09NA)

Modine Mfg. Co. model Split geothermal system (GS/ES)

NuTone model FG7TC/L-VS furnace

NuTone model R8HE-A package gas/electric unit

Panasonic model CU-2E18NBU heat pump

Payne model PG8JVB gas furnace

Payne model PG96VAT gas furnace

Pridiom model PMS097EL, PMS127EL, PMS187EL, PMS247EL ductless mini-split heat pump

Rheem model 80 percent gas furnace platform

Ruud model 80 percent gas furnace platform

Samsung model AR12HSFSHWK/CV ductless mini-split

Tappan model FG7TC/L-VS furnace

Tappan model R8HE-A package gas/electric unit

Tempstar model F9MVE furnace

Tempstar model N9MSB furnace

TETCO model ES4-R TRT, geothermal heat pump, outdoor split system with hot water generation

TETCO model TWS/TWD geothermal water-to-water unit

Thermo Products LLC model Spirit Series furnace

Trane model TruComfort XV18 heat pump

Trane model Variable Refrigerant Flow (VRF) system, indoor (4TVW0012B100NC) and outdoor (4TVH0036B100NB)

Unico System model iSeries heat pump inverter unit

WaterFurnace model 5 Series indoor split geothermal heat pump, 500R11

WaterFurnace model 5 Series outdoor split geothermal heat pump, 500R011

Westinghouse model FT4BE heat pump

Westinghouse model R8HE-A package gas/electric unit

York model Affinity™ DHPM ductless mini-split heat pump

York model LX Series TM9V, TM8V and TMLV gas furnaces

Every year, The NEWS introduces the latest heating equipment that is available for the upcoming winter season. The intent is to help contractors prepare for this busy period by doing the research that will help them distinguish between brands.

Like last year, this year’s Heating Showcase is split into two parts — residential and commercial. The residential/light commercial information is published in this issue, and the commercial products will be featured in the Oct. 14 issue. Included in the coverage is feature-specific information about each individual product, as submitted by the manufacturers.

This photo feature provides more in-depth information on the features of each individual unit as well as technical support information from the manufacturer. The manufacturers provided all of the data included in the product grid, as well as in the photo feature. Therefore, any product questions should be directed to them via the contact information provided in the photo feature section.

To view the product grid, which includes technical facts, such as unit tonnage, refrigerant type, efficiency rating, and cooling capacity, CLICK HERE.

Footprint (in inches): 29 (length) by 18 (width) by 33 (height)

Serviceability features: Equipped with EHX technology, which eliminates hot spots and increases airflow for greater heat exchange. The electronic control system also prolongs system life by continuously monitoring internal components for optimum performance and fault prevention. Comfort Sync’s advanced features allow end users to select airflow, set points, and other parameters, quickly and easily.

Technical support: Available 8 a.m. to 8 p.m. Eastern time, Monday to Friday, at 800-515-3501.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Quiet combustion technology uses a smaller Btu input per burner for quieter startup and operation. The enclosed burner compartment also reduces combustion noise.

IAQ equipment supported: The variable-speed blower motor allows customized dehumidification programs. The fan-only speeds are also programmable, allowing consumers to set the furnace to fit their needs.

Thermostat compatibility: Compatible with most thermostats including the Comfort Sync Wi-Fi thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Comfort Sync is far more than a thermostat, it is a smart-home HVAC control center with the ability to coordinate and manage every aspect of a system, giving customers peace of mind.

Warranty information: Limited lifetime stainless steel heat exchanger and 10-year limited parts warranty, which applies to residential applications only. Visit www.alliedair.com for full warranty terms, conditions, and exclusions.

Special installation requirements: Comfort Sync features plug-and-play startup, which makes installation simple and easy.

Contact: Allied Air Enterprises, www.alliedair.com.

eProduct 160

Footprint (in inches): 36 (length) by 36 (width) by 38 (height)

Serviceability features: Built-in, expanded ComfortAlert diagnostics. Setup is capable with two low-voltage wires to outdoor unit. Diagnostic indicator lights and storage of six fault codes included. Color-coded terminal strip for noncommunicating setup. Factory-installed bi-flow liquid line filter drier, suction line accumulator, crankcase heater, high-capacity muffler, coil, and ambient temperature sensors. Both high- and low-pressure switches are included.

Technical support: Contact local distributor or call 888-593-9988, option 5, 7 a.m. to 7 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Unique sound control top design. The two-stage Copeland UltraTech scroll compressor is covered with a high-density sound blanket. Quiet, two-speed ECM-style condenser fan motor included.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy-efficient 5-millimeter condensing coil design in some models. Compatible with ComfortNet Internet communications system. SmartShift defrost technology with short-cycle protection ensures quiet, reliable defrost. Steel-louvered coil guard for added coil protection. Baked-on powder paint for long-lasting finish. Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified; ETL-listed.

Warranty information: Lifetime unit replacement limited warranty (good for as long as customer owns home) and 10-year parts limited warranty with online registration completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available).

Contact: Goodman Mfg. Co. LP, 713-861-2500; www.amana-hac.com.

eProduct 161

Footprint (in inches): 29 (length) by 18-25 (width) by 35 (height)

Serviceability features: Cabinet sizes have been reduced from 40 to 34 ½ inches, and cabinet widths have also been reduced on some sizes. There is a factory-installed trap for vertical applications, a vertical gas valve for easy connection to either side of the cabinet, and an air inlet connections on top or either side. Tool-less service access doors with thumb screws. Self-diagnostic control board with constant memory fault code history.

Technical support: Contact local distributor or call 888-593-9988, option 5, 7 a.m. to 7 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Variable-speed ECM and induced draft motors for quiet ramp up and down operation. A fully insulated heat exchanger and blower section also provide noise attenuation.

IAQ equipment supported: Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier. Compatible with all Clean Comfort IAQ products. Auto-Comfort and enhanced dehumidification modes available. New cabinet wrapper design provides less than 2 percent cabinet leakage with all models. All models comply with California Low NOx emissions standards.

Thermostat compatibility: Compatible with most thermostats including ComfortNet.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Award-winning, unique primary heat exchanger design. Heavy-duty stainless steel tubular heat exchanger with stainless steel secondary heat exchanger. Self-calibrating modulating gas valves auto-configure for each installation. Durable silicon nitride igniters. Embossed single-piece cabinet wrapper provides increased cabinet strength.

Warranty information: Lifetime unit replacement limited, lifetime heat exchanger limited (in both cases, good for as long as customer owns home), and 10-year parts limited warranties with online registration completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: Manufacturer did not specify.

Contact: Goodman Mfg. Co. LP, 713-861-2500; www.amana-hac.com.

eProduct 162

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Backlit communicating display assembly provides system status and alert information. Time- and date-stamped system alerts. Pump-down mode for heating or cooling operation. Single inverter drive for all tonnages. Quick-Sess cabinet, service access, and refrigerant connections with full coil protection. Refrigerant components outside of coil.

Technical support: Contact local distributor.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Compressor sound jacket and swept-blade fan provides noise reduction.

IAQ equipment supported: The American Standard AccuClean whole-house air cleaner provides advanced air filtration that removes up to 99.98 percent of all the particles and allergens from the filtered air for a cleaner, healthier, and more comfortable home.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The unit optimizes its run speed, often at lower outputs, providing continuous comfort within a half degree of the targeted temperature. It works seamlessly with American Standard’s AccuLink™ Controls and Nexia™ Home Intelligence, so homeowners can manage their home’s heating remotely with smartphones, tablets, and computers.

Warranty information: Ten-year limited compressor, 10-year limited outdoor coil, and 10-year limited internal functional parts warranties. If the product is not registered within 60 days of installation base, limited warranty terms will apply. Option to purchase transferability of registered limited warranty is available. Optional extended warranties are available, which can pay for labor and other costs not covered by manufacturer’s limited warranty. Dealer will have full warranty information at time of purchase.

Special installation requirements: Manufacturer did not specify.

Contact: American Standard Heating & Air Conditioning, 800-945-5884; www.americanstandardair.com

eProduct 163

Footprint (in inches): 30 (length) by 14-25 (width) by 35 (height)

Serviceability features: Blower assembly is mounted on rails for easy upfront installation and removal. Gas furnaces feature large, robust one-quarter-turn knobs for easy door installation and removal. An LED makes diagnostic flash codes easier to read. The display allows technicians to see most recent stored fault codes, even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.goarcoaire.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information available online at www.goarcoaire.com.

Noise-reduction features: The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Arcoaire furnaces can control relative humidity during cooling operation. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed for four-way, multi-position installation, just 35 inches tall, and light in weight, these two-stage models feature ECM blowers that can deliver an increase in cooling efficiency when paired with select Arcoaire condensing units and evaporator coils. Meets low NOx emissions standards.

Warranty information: Five-year no-hassle-replacement limited warranty. Lifetime heat exchanger and 10-year parts limited to original purchaser with timely registration. Parts limited warranty period is 20-year heat exchanger and five-year parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goarcoaire.com.

eProduct 164

Footprint (in inches): 30 (length) by 14-25 (width) by 35 (height)

Serviceability features: The furnace is equipped with easy-to-remove panels and innovative knobs to allow easy door removal and secure attachment. An LED makes diagnostic flash codes easier to read. For servicing convenience, the entire blower assembly and heat exchanger are mounted on slide-out rails.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.goarcoaire.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.goarcoaire.com.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115-V) and humidifiers (24- and 115-V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Features a single-stage gas valve and single-stage ignition control; four-position installation capability; is dual-certified for one- or two-pipe installation; and its durable silicon nitride igniters last longer, can withstand high-line voltage, and don’t require voltage regulators. Meets low NOx emissions standards and includes an internal condensate drain system. High-temperature limit control prevents overheating.

Warranty information: Twenty-year limited warranty on the heat exchanger; 10-year parts limited warranty to original purchaser with timely registration. Parts limited warranty period is five years if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goarcoaire.com.

eProduct 165

Footprint (in inches): 29 (length) by 18 (width) by 33 (height)

Serviceability features: The unit is equipped with EHX technology, which eliminates hot spots and increases airflow for greater heat exchange. The electronic control system also prolongs system life by continuously monitoring internal components for optimum performance and fault prevention. Comfort Sync’s advanced features allow end users to select airflow, set points, and other parameters quickly and easily.

Technical support: Available 8 a.m. to 8 p.m. Eastern time, Monday to Friday, at 800-515-3501.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Quiet Combustion technology uses a smaller Btu input per burner for quieter startup and operation. The enclosed burner compartment also reduces combustion noise.

IAQ equipment supported: The variable-speed blower motor allows customized dehumidification programs. The fan-only speeds are also programmable, allowing consumers to set the furnace to fit their needs.

Thermostat compatibility: Compatible with most thermostats including the Comfort Sync Wi-Fi thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Comfort Sync is far more than a thermostat, it is a smart-home HVAC control center with the ability to coordinate and manage every aspect of a system, giving customers peace of mind.

Warranty information: Limited lifetime stainless steel heat exchanger and 10-year limited parts warranties, which apply to residential applications only. Visit www.alliedair.com for full warranty terms, conditions, and exclusions.

Special installation requirements: Comfort Sync features plug-and-play startup, which makes installation simple and easy.

Contact: Allied Air Enterprises, www.alliedair.com.

eProduct 166

Footprint (in inches): 28 (length) by 33 (width) by 26 (height)

Serviceability features: Features two-stage step-capacity scroll compressor, R-410A, double O-ring connections, moveable control panels, and four electrical entrance points for ease of service, superior efficiencies, and quiet performance. Units can be stacked up to three high for space-saving design.

Technical support: In-house and field training classes available. Service provided through distribution network.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Copeland step-capacity two-stage scroll compressor mounted on full floating base with double grommets and sound cover. The cabinet is fully insulated.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Suitable for ground water or ground loop applications. Offers many hydronic options, including radiant floor heating, domestic water heating, and snow/ice melt. Units designed and constructed to be stacked up to three high for greater installation and space-saving design.

Warranty information: Ten-year parts and 10-year compressor warranties.

Special installation requirements: None.

Contact: Bard Mfg. Co. Inc., 419-636-1194; www.bardhvac.com.

eProduct 167

Footprint (in inches): 17 (length) by 34 (width) by 14 (height)

Serviceability features: Coated heat exchanger significantly reduces scale formation, lowering maintenance costs while maintaining peak efficiency for a longer period.

Technical support: Visit www.boschheatingandcooling.com/downloads or call 866-642-3198.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; and startup instructions included.

Noise-reduction features: Special insulation ensures quiet operation. Anti-cycle and modulation control and electronic ignition included.

IAQ equipment supported: Aluminum-silicon nano-coated heat exchanger delivers highly efficient (95 percent AFUE) and durable performance. Pre-mix burner with low NOx emissions per 2012 SCAQMD regulations. Simple, intelligent control options optimize efficiency and fuel consumption. Engineered for low electrical consumption when boiler is in standby mode.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The product line consists of five models for space heating and three for combi space heating and domestic hot water production up to 4 gallons per minute (gpm). All models are high-efficiency gas condensing units designed for wall-mount applications in sizes from 57-151 MBtuh. Units are housed in a clean-looking compact package that is easy to install and service and come with a fully modulating fan with a 5:1 turndown for optimal combustion efficiency. All Greenstar units have an AFUE of 95 percent and come with venting options for added installation flexibility. Simple, intelligent control options optimize efficiency and fuel consumption.

Warranty information: Five-year parts and labor limited and limited lifetime heat exchanger warranties.

Special installation requirements: Boilers may be wall-mounted or accept optional floor stand if a floor-mounted boiler is preferred.

Contact: Buderus, 866-642-3198; www.buderus.us.

eProduct 168

Footprint (in inches): 49 (length) by 30 (width) by 22 (height)

Serviceability features: Easy-access filter rack and 2-inch MERV 8 filter, electronic circuit board with unit alerts, water coil/coaxial coil/condenser freeze protection, variable-speed commercial fan motor (CFM), tin-plated evaporator air coil, and sloped stainless steel drain pan included.

Technical support: Available at 866-642-3198.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Intuitive unit adjusts to the intensity of a home’s heating and cooling needs, thereby lowering operating costs while maximizing efficiency and comfort. Variable-speed CFM can deliver precise cfm, which equates to maximum temperature and humidity control, lower sound levels, and reduced operating costs. Floating base pan with high-density foam pad gives unit sound levels as low as 52 dB.

IAQ equipment supported: Works in conjunction with optional products, such as smoke detectors, humidifiers, carbon and potassium-permanganate filters, fresh-air dampers, and photo-catalytic oxidizers.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: A split system allows the installer to separate the condenser section up to 75 feet away from the fan coil section to isolate sound, vibration, and unwanted heat from the conditioned space. The condenser may be located indoors or outdoors. Available hot water generator provides domestic hot water using waste heat from the compressor. Two-stage scroll compressor operates in harmony with the earth’s temperature, extending service life and saving money.

Warranty information: Limited all parts and labor for up to 10 years.

Special installation requirements: A split system allows the installer to separate the condenser section up to 75 feet away from the fan coil section to isolate sound, vibration, and unwanted heat from the conditioned space. The condenser may be located indoors or outdoors.

Contact: Bosch Thermotechnology, 866-642-3198; www.boschheatingandcooling.com.

eProduct 169

Footprint (in inches): 28 (length) by 21 (width) by 34 (height)

Serviceability features: Diagnostic lights for easy troubleshooting without counting flashes.

Technical support: Technical support available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instruction included.

Noise-reduction features: Blower compartment is sealed to reduce air leakage and insulated for quiet operation.

IAQ equipment supported: Integrated furnace control board provides connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: ECMs boost cooling efficiency up to one full SEER point. The unit is easy to service, courtesy of smarter diagnostic lights, resulting in no need to count flashes. Insulated blower compartment and sealed combustion vestibule provide quiet operation.

Warranty information: Five-year limited parts is upgraded to 10-year limited parts with product registration. One-year unit replacement is upgraded to 10-year limited unit replacement with product registration.

Special installation requirements: No.

Contact: Nordyne, 800-422-4328; www.broanhvac.net.

eProduct 170

Footprint (in inches): 56 (length) by 48 (width) by 47 (maximum height) with base rails

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Easy access to the evaporator coil allows for cleaning and maintenance. Externally accessible service ports for quick access to the refrigeration system.

Technical support: Technical support available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 at www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Swept-wing fan blade combined with fixed-speed ECM and custom made orifice in a one-piece top for quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Residential gas pack achieves 95 percent AFUE. Microchannel coil technology provides superior corrosion resistance. Energy-efficient ECM provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application.

Warranty information: Five-year limited parts warranty is upgraded to 10-year limited parts with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement with product registration.

Special installation requirements: Unique condensate removal process with no internal traps required. Horizontal and downflow drain kits are available.

Contact: Nordyne, 800-422-4328; www.broanhvac.net.

eProduct 171

Footprint (in inches): 23-31 (length) by 23-31 (width) by 39 (height)

Serviceability features: Evolution Connex™ control can display system history for faster diagnosis of the complete system, allowing a service technician to attach a second control to an outdoor unit for service without entering the home, and to access a system remotely via the Internet to prepare for a service call in advance, if connected to a Wi-Fi network.

Technical support: Support provided through a nationwide network of local distributors.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Variable-speed compressor and compact ECM operate at quiet, low speeds most of the time. The AeroQuiet™ System II includes quiet motor mounts, a compressor sound blanket, and forward-swept fan blades. These sound-deadening features are integrated in the cabinet, fan system, and top for better airflow, higher efficiency, and reduced noise.

IAQ equipment supported: As part of an installed system, it’s compatible with Bryant humidifiers, ventilators, UV lamps, and the Evolution air purifier.

Thermostat compatibility: Compatible with most thermostats, but with significantly reduced functionality. Evolution control required for full-feature capabilities.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Achieves a cooling efficiency up to 18 SEER and a heating efficiency up to 11 HSPF utilizing an innovative, compact design. Offers variable-speed technology with ease of installation, service, and maintenance.

Warranty information: Ten-year parts limited (including compressor) if properly registered within 90 days (restrictions apply; see warranty certificate for details).

Special installation requirements: None.

Contact: Bryant Heating & Cooling Systems, 888-994-7237; www.bryant.com.

eProduct 172

Footprint (in inches): 30 (length) by 14-25 (width) by 35 (height)

Serviceability features: Incorporates an LED on the control board to alert service technicians using diagnostic codes. Also incorporates a self-test routine that checks all major functions of the unit. An automotive-type fuse is used on the control board for circuit protection, and a loss of power will not erase stored system fault codes.

Technical support: Support provided through nationwide network of local distributors.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Direct-drive, variable-speed blower motor operates at lower, quieter speeds, most of the time. Insulated cabinet, sealed blower compartment, and rubber grommets absorb sound and vibration.

IAQ equipment supported: As part of an installed system, compatible with Bryant IAQ system components, including humidifiers, ventilators, UV lamps, and the Preferred air purifier.

Thermostat compatibility: Compatible with most thermostats, but with reduced functionality. Evolution control required for full-feature capabilities.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Four-way, multipoise installation with 12 different venting options for a wide range of applications. Features Perfect Heat®, SmartEvap™, and FanOn Plus™ technologies for improved comfort, lower sound levels, better humidity control, and reduced temperature differences between rooms.

Warranty information: Ten-year parts limited and lifetime heat exchanger warranties limited to the original owner with timely registration. If not registered within 90 days of installation, the limited warranty period is five years with a 20-year heat exchanger, limited. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Bryant Heating & Cooling Systems, 888-994-7237; www.bryant.com.

eProduct 173

Footprint (in inches): 23-31 (length) by 23-31 (width) by 39 (height)

Serviceability features: Communication between system components allows the Infinity Touch Control to display system history for faster diagnosis of the complete system, which allows a service technician to attach a second control to an outdoor unit for service without entering the home. If connected to a Wi-Fi network, the system can be accessed remotely via the Internet to prepare for the service call in advance.

Technical support: Support provided through nationwide network of local distributors.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Variable-speed compressor and compact ECM operate at quieter, lower speeds, most of the time. Soft motor mounts, a compressor sound blanket, forward-swept fan blades, a laminated sound-eliminating compressor mounting plate, and a unique top with integrated Silencer System II airflow baffle help achieve low sound ratings.

IAQ equipment supported: As part of an installed system, it is compatible with Carrier IAQ system components, including humidifiers, ventilators, germicidal UV lamps, and the Infinity air purifier. When paired with the Infinity Touch Control, humidifier, and variable-speed furnace or fan coil, it provides Ideal Humidity System™ functionality, which monitors and controls both temperature and humidity, even when the system isn’t actively heating or cooling.

Thermostat compatibility: Compatible with most thermostats, but Infinity Touch Control is recommended for full functionality.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: A small ducted heat pump with a variable-speed compressor. The high-efficiency heat pump achieves a heating efficiency up to 11 HSPF and a cooling efficiency up to 18 SEER. Makes state-of-the-art variable-speed technology available with ease of installation, service, and maintenance.

Warranty information: Ten-year parts limited warranty (including compressor) if properly registered within 90 days (restrictions apply; see warranty certificate for details). If not registered within 90 days of installation, the limited warranty is five years.

Special installation requirements: None.

Contact: Carrier Corp., 800-946-2930; www.carrier.com.

eProduct 174

Footprint (in inches): 30 (length) by 18-25 (width) by 35 (height)

Serviceability features: Infinity Touch Control provides remote Internet access to the system, allowing contractors to prepare for a service call in advance. Nonvolatile memory allows technicians to see fault code history, even if power has been interrupted. Large twist-door attachments make access easy: Remove two screws and blower assembly slides out on rails without the need to disconnect wiring.

Technical support: Support provided through a nationwide network of local distributors.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Modulating gas valve operates the furnace at quieter, lower fire rates most of the time. Variable-speed blower and inducer ECMs operate at quiet, low speeds. Insulation dampens sound in heat exchanger and blower sections of the cabinet. Blower-motor mounting is isolated using rubber grommets to reduce sound.

IAQ equipment supported: Compatible with Carrier IAQ system components, including humidifiers, ventilators, germicidal UV lamps, and Infinity air purifiers. The furnace ships with an external media filter cabinet.

Thermostat compatibility: Compatible with most thermostats, but Infinity Touch Control is recommended for full functionality.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The line includes a 98.5 percent AFUE (Model 59MN7A060V21-20) gas furnace. A modulating gas valve fluidly adjusts from 40-100 percent of capacity in 1 percentage-point increments for precise comfort. When paired with an Infinity Touch Control, homeowners can access their heating and cooling system via some mobile devices.

Warranty information: Lifetime heat exchanger and 10-year parts warranties limited to original purchaser with timely registration. Heat exchanger warranty limited to 20 years and parts, five years, if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: Carrier Corp., 800-946-2930; www.carrier.com.

eProduct 175

Footprint (in inches): 28 (length) by 18-25 (width) by 35 (height)

Serviceability features: Front panel is easily removed for access to components, and panel screws are captured to keep them from getting lost. Onboard diagnostics include dedicated light for flame signal strength and two lights that illuminate in combination for easily recognized fault codes.

Technical support: Experienced technical advisors are available to answer questions about troubleshooting, installation, and service, 8 a.m. to 5 p.m. Eastern time, weekdays, by calling 517-787-2100. Additionally, sales representatives around the U.S. and Canada can also provide assistance; sales rep contact information is located on the website under the Where to Buy link.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: The high-efficiency, three-speed blower is designed to deliver warm air quietly and efficiently. Silicon-nitride-type igniter is quiet and automatic. Sealed vestibule minimizes burner and inducer sound while sealed door on blower compartment and cabinet insulation contain operational sound.

IAQ equipment supported: The filter is readily accessible for fast, simple changes; also, integrated furnace control includes connections to add on an electronic air cleaner, if desired.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Primary heat exchanger is resistant to thermal fatigue. Heated air is locked in, and cold air is locked out. The direct-drive system has no pulleys or belts to wear out, and controls are integrated into a single board for fast setup; ready for add-ons such as an air cleaner. Compact size makes furnace ideal for replacements.

Warranty information: Primary and secondary heat exchangers are covered by a limited lifetime warranty to the original owner in the original installation. If the heat exchanger fails within 12 years of original purchase, the entire furnace will be replaced (product registration is required). Other components are covered by a 12-year warranty (with registration). Some limitations apply; see the printed warranty on the website for details.

Special installation requirements: Procedures for installation are clearly explained in the installation, operation, and maintenance manual, including venting, air circulation, locating the furnace, gas supply lines, thermostat connection, and startup procedures. In order to accommodate air filter changes and any maintenance/service needed, allow at least 24 inches of clearance from the front of the unit; however, a minimum of 36 inches is strongly recommended.

Contact: Heat Controller/MARS, 517-787-2100; www.century-hvac.com.

eProduct 176

Footprint (in inches): 56 (length) by 48 (width) by 35-43 (height)

Serviceability features: Controls and compressor are easily reached through access panels on the side of the unit. High- and low-pressure service ports allow access without interrupting operation. Top grille assembly is removable for access to the fan motor. Evaporator coil is readily accessible for cleaning. The unit is built with standard components for parts availability.

Technical support: Experienced technical advisors are available to answer questions about troubleshooting, installation, and service, 8 a.m. to 5 p.m. Eastern time, weekdays, by calling 517-787-2100. Additionally, sales representatives around the U.S. and Canada can also provide assistance. Sales representative contact information is available on the website under the Where to Buy link.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and owner’s manual included.

Noise-reduction features: A 20-inch fan blade combined with custom venturi condenser fan contributes to minimized operational sound and low vibration. A scroll compressor provides maximum efficiency with quiet operation.

IAQ equipment supported: Air filter(s) must be installed in the system’s return air duct.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Can be converted for horizontal or downflow air delivery. Both condenser and evaporator coils are all-aluminum microchannel to maximize heat transfer while resisting corrosion. An adaptive ignition feature varies warm-up time to match current conditions. Built with superior water management features. Galvanized steel cabinet has polyurethane coating and plastic mesh hail guard.

Warranty information: Limited express warranty covers the heat exchanger for 20 years. All parts, including the compressor, are warrantied for 10 years from date of purchase by the original owner with product registration within 90 days of purchase (five years without registration). Entire unit will be replaced if compressor or heat exchanger fails within first year, if unit has been properly registered. Some limitations apply; see printed warranty on website for details.

Special installation requirements: Can be slab- or roof-mounted; ideal for a home without a basement or adequate utility space. Unit comes completely assembled and is designed for outdoor installation. Basic connections, such as supply and return ducts, line voltage, gas supply, and thermostat wiring, are required. Detailed installation instructions are set forth in the installation, operation, and maintenance manual.

Contact: Heat Controller/MARS, 517-787-2100; www.century-hvac.com.

eProduct 177

Footprint (in inches): Manufacturer did not specify.

Serviceability features: The iGate™ technology represents the next generation in intelligent controls by using two-way communication to provide a gateway into the system. The iGate control system enables the homeowner and dealer to monitor the performance of the unit, custom tailor its operation, and diagnose any issues, all from the thermostat. The Tranquility 30 also has a swing-out/drop-out control box that offers easy access.

Technical support: Available at 405-745-6000.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Compressor double isolation, foil-faced insulation in the blower section, and fully insulated compressor section attribute to quiet operation.

IAQ equipment supported: MERV 11 2-inch filters are standard. Optional EarthPure air cleaners, which remove up to 97 percent of impurities down to 0.3 microns, are available. They also remove unwanted odors.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: This package geothermal heat pump delivers efficiency (30 EER and 4.8 COP), comfort, reliability, and serviceability driven by the iGate two-way communicating control, two-stage compressor, variable-speed fan, and vFlow™ internal variable water flow components. The Tranquility 30 also delivers reliable operation, lower operating cost, and compact installation.

Warranty information: Five-year standard with the option to extend to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: ClimateMaster Inc., 405-745-6000; www.climatemaster.com.

eProduct 178

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Exclusive iGate communicating controls use the power of two-way communication to configure, monitor, and diagnose the system. Web-enabled configuration and diagnostics allow dealers to access real-time data and fault information and make changes to the configuration of the unit from any Web-enabled device. Two-section swing-out/drop-out control box design provides wide-open service access.

Technical support: Available at 405-745-6000.

Technical support materials: Available to ClimateMaster Geo-Elite dealers.

Noise-reduction features: Foil-faced insulation in the blower section and fully insulated compressor section reduce noise. Also includes a compressor-mounted floating plate.

IAQ equipment supported: Two-inch, high-efficiency MERV 11 filter or optional EarthPure air cleaner for high-quality indoor air.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: This highly efficient unit is certified by Air-Conditioning, Heating, and Refrigeration Institute (AHRI) to exceed 45 EER. The Trilogy has Q-Mode, which provides year-round, full-time water heating plus space heating and cooling while generating hot water, further reduces home energy and operating costs.

Warranty information: Standard warranty is five years. An option exists to extend labor allowance to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: ClimateMaster Inc., 405-745-6000; www.climatemaster.com.

eProduct 179

Footprint (in inches): Indoor: 36 (length) by 10 (width) by 15 (height); Outdoor: 35 (length) by 14 (width) by 23 (height).

Serviceability features: Maintenance points are located behind easy-access panels, making installation and service a breeze for a trained technician. Flare connection lines are located on the side of the unit cabinet, a fully serviceable brass service valve prevents corrosion and provides access to the system, and a shutoff valve can be fully shut off while two-way service valve may be front-seated to manage refrigerant charge during servicing.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV), 7 a.m. to 5 p.m. Central time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included. Online documentation, including technical/service manuals and parts look-up, can be found at www.upgnet.com or www.colemanhvacdealer.com.

Noise-reduction features: Twin-rotary inverter compressor on all models features high-efficiency operation that modulates down to 15 Hz and up to 120 Hz for reduced vibration and quiet operation.

IAQ equipment supported: An advanced multipart filter system accessory uses a catechin material and treated fibers to remove contaminants, such as allergens, to improve IAQ.

Thermostat compatibility: Uses a wireless remote controller with a built-in temperature sensor. When the unique I FEEL function is activated, the system satisfies set point temperatures where the remote control is located.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The Energy Star-certified mini split fits a variety of areas. The wireless remote controller with a built-in temperature sensor and unique I FEEL function satisfies the temperature set point wherever the remote control is located. In heating mode, the indoor fan is delayed between one to three minutes to allow refrigerant to warm up and avoid cold blow.

Warranty information: Six-year limited compressor and two-year limited parts warranties.

Special installation requirements: There are no special installation requirements. The units are plug-and- play ready.

Contact: Johnson Controls Inc., 414-524-5487; www.colemanhvacdealer.com.

eProduct 180

Footprint (in inches): 30 (length) by 15 (width) by 33 (height)

Serviceability features: These furnaces can be used with the Echelon Communicating Control, which provides system status updates to homeowners and contractors. The systems can be applied in upflow, horizontal left/right, or downflow installations; provide easy access to connect power/control wiring; and don’t include knockouts, making installation easier. A fully supported blower ensures easy access and removal of the blower.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV), 7 a.m. to 5 p.m. Central time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included. Support documents — including a technical guide, submittal data sheet, guide specifications, installation instructions, user’s manual, and a parts list — are available at www.upgnet.com or by request. A unique, quick-reference setup guide for contractors is also available.

Noise-reduction features: Quiet, two-stage inducer, burner, and variable-speed ECM blower operation ensure reduced noise, as does the insulated blower compartment.

IAQ equipment supported: External air filters offer maximum flexibility to meet customer IAQ needs. Variable-speed ECM fans provide more consistent airflow and temperatures — and more options for continuous airflow settings — resulting in increased filtration and improved comfort. These furnaces are compatible with all Coleman premium IAQ products.

Thermostat compatibility: Compatible with most thermostats including communication capable thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: These furnaces are designed for installation in small spaces, such as basements, closets, alcoves, attics, etc. Communications capability allows furnaces to communicate with all key components of a home comfort system, providing detailed system information to homeowners and contractors. A built-in float switch, outdoor temperature sensor, and auxiliary terminals are included.

Warranty information: Lifetime limited warranty on both heat exchangers to the original purchaser; 20-year limited from original installation date to subsequent purchaser. Ten-year heat exchanger warranty on commercial applications. Standard five-year limited parts warranty. Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Installation is easy thanks to design features such as narrow 14 1/2 inch width; minimal conversion for upflow, horizontal, or downflow installation; moveable duct connector flanges; no knockouts; internal condensate drain trap; supported blower assembly; venting options; controls access; quarter-turn knobs on doors; and inducer rotation using four screws.

Contact: Johnson Controls Inc., 414-524-5487; www.colemanhvacdealer.com.

eProduct 181

Footprint (in inches): 31 (length) by 31 (width) by 43 (height)

Serviceability features: Common suction port allows for suction pressure reading in all operational modes without removing panels. Removable top grille assembly allows service without the need to disconnect fan motor leads. Access to compressor and controls is conveniently located on the side of the unit. Fixed orifice is integrated into liquid line service valve for simple change out.

Technical support: Experienced technical advisors are available to answer questions about installation, operation, and service at 517-787-2100, 8 a.m. to 5 p.m. Eastern time, weekdays. Sales representatives throughout the U.S. and Canada can also provide assistance. Contact information can be found on the website under the Where to Buy link.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and quick reference data sheet for setup included.

Noise-reduction features: Hot-gas muffler reduces compressor sound and vibration. Scroll compressor is designed for ex- ceptionally quiet operation. Composite base pan absorbs operational sound.

IAQ equipment supported: IAQ is dependent on indoor air delivery equipment matched to heat pump.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Metal jacket is galvanized steel with polyester urethane finish to protect the coil and add to its attractive appearance. The vertical slot design adds to structural integrity. Liquid line filter drier included for field installation. Suction line accumulator is standard for compressor protection. Demand defrost adds to energy efficiency.

Warranty information: Limited express warranty covers all parts, including the compressor, for 12 years from date of purchase by the original owner with product registration within 90 days of purchase (six years without registration). Entire unit will be replaced if compressor fails within the first year, if unit has been properly registered. Without registration, the unit will be replaced if compressor fails within 90 days of purchase. Some limitations apply; see printed warranty on website for details.

Special installation requirements: Unit can be installed on the ground level or can be rooftop-mounted. The filter drier included with the unit must be installed in the liquid line. Sufficient clearance must be allowed around the unit for unobstructed airflow. In northern areas, the heat pump should be installed above typical snow depth.

Contact: Heat Controller/MARS, 517-787-2100; www.comfort-aire.com.

eProduct 182

Footprint (in inches): Indoor: 33-47 (length) by 8-10 (width) by 11-13 (height)

Serviceability features: The system monitors itself for abnormal operations and turns off the unit automatically to protect it from further damage. It then displays an error code to help troubleshoot the problem for a quick solution. On outdoor units, service ports are easily accessible to speed up service.

Technical support: Experienced technical advisors are available to answer questions about installation, operation, and service, 8 a.m. to 5 p.m. Eastern time, weekdays, at 517-787-2100. Sales representatives throughout the U.S. and Canada can also provide assistance. Sales representatives’ contact information can be found on the website under the Where to Buy link.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and comprehensive service manual included.

Noise-reduction features: The mini-split design keeps the compressor sound outside, and it operates exceptionally quietly because the dc compressor runs mostly at low speed, which reduces any vibration and associated noise. The high-tech fan of indoor unit delivers balanced, quiet airflow.

IAQ equipment supported: A silver filter eliminates bacteria in the airstream. Self-cleaning performance wicks away any moisture, essentially cleaning the inside of the indoor unit to prevent bacteria from forming. This is especially useful at the end of the season or when the unit will not be used for an extended period of time.

Thermostat compatibility: Built-in thermostat included.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The follow function senses the conditions where the occupant is in the room and adjusts temperature accordingly. Low-ambient operation down to 5?F. Refrigerant leak detection prevents the unit from freezing due to low charge. Defrost control automatically removes frost accumulation on the coil.

Warranty information: Limited express warranty covers the compressor for six years and other parts for two years from the date of purchase by the original owner with product registration within 90 days of purchase. Some limitations apply; see printed warranty on website for details.

Special installation requirements: Outdoor location should be as close to indoor unit as possible. The indoor unit should be mounted as high on the exterior wall as possible, allowing 6 inches between the top of the unit and ceiling. Installation directions are clearly spelled out in the installation, operation, and maintenance manual.

Contact: Heat Controller/MARS, 517-787-2100; www.comfort-aire.com.

eProduct 183

Footprint (in inches): 30 (length) by 18-25 (width) by 35 (height)

Serviceability features: The gas furnaces feature large, one-quarter-turn knobs for easy door installation and removal. An LED makes diagnostic flash codes easier to read. The blower assembly is mounted on rails for easy, upfront installation and removal. The unit allows technicians to see the last seven stored fault codes, even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.gocomfortmaker.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.gocomfortmaker.com.

Noise-reduction features: A variable-speed ECM blower reduces operating sound levels. A special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger and blower compartments.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Comfortmaker furnaces can control relative humidity during cooling operation. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Requires a special thermostat. For self-configuring control to function, must use with Comfortmaker Observer™ communicating wall control (thermostat).

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Features a communicating control. Furnaces are built with stainless steel secondary heat exchangers. Modulating (multistage) gas valves allow furnaces to operate on a quieter, low-heat setting unless thermostat calls for more heat. Designed for four-way multi-position installation, just 35 inches tall and light in weight.

Warranty information: Ten-year no-hassle-replacement limited warranty. Lifetime heat exchanger and 10-year parts warranties limited to original purchaser with timely registration. Parts limited warranty period is 20 years for the heat exchanger and five years for parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gocomfortmaker.com.

eProduct 184

Footprint (in inches): 33-44 (length) by 48 (width) by 44-55 (height)

Serviceability features: Installs easily on a rooftop or the ground level. Three panels allow easy access for maintenance and installation. Easily converts to down-discharge applications.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.gocomfortmaker.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.gocomfortmaker.com.

Noise-reduction features: Includes two-stage Copeland scroll compressor, which operates most of the time in the quiet, low stage. Outdoor fan is sized and optimized for minimal noise.

IAQ equipment supported: Enhanced dehumidification is available on high-stage cooling with use of a dehumidistat. Accessory filter racks support 2-inch filters.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Two-stage Copeland scroll compressors provide two-stage heating and cooling operation. The units include field-convertible airflow for either ground level (horizontal) or rooftop (down) airflow and high-efficiency ECM indoor blowers. With cooling efficiencies up to 15.5 SEER and 12.5 EER, the PHR5 package heat pumps are Energy Star-qualified.

Warranty information: Ten-year limited parts, including compressor and coils, to original owner upon timely registration. Limited warranty period is five years for parts if not registered within 90 days of installation. Restrictions apply. See warranty certificate for details. This product qualifies for the five-year no-hassle-replacement limited warranty. (If the compressor or covered coil fails within five years from the installation date, then ICP will provide a one-time replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.)

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gocomfortmaker.com.

eProduct 185

Footprint (in inches): 36 (length) by 36 (width) by 38 (height)

Serviceability features: Features built-in, expanded ComfortAlert diagnostics. Setup is capable with two low-voltage wires to the outdoor unit. Diagnostic indicator lights and storage retains six fault codes. Color-coded terminal strip for noncommunicating set up. Factory-installed bi-flow liquid-line filter drier, suction line accumulator, crankcase heater, high-capacity muffler, coil and ambient temperature sensors, and both high- and low-pressure switches.

Technical support: Contact local distributor or call 888-593-9988, option 5, 7 a.m. to 7 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Unique sound-control top design. The two-stage Copeland UltraTech scroll compressor is covered with a high-density sound blanket. A quiet, two-speed ECM-style condenser fan included.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy-efficient 5-millimeter condensing coil design. Compatible with ComfortNet Internet communications system. SmartShift defrost technology with short-cycle protection to ensure quiet, reliable defrost. Steel-louvered coil guard for added coil protection. Baked-on powder paint for long lasting finish. Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified; ETL-listed.

Warranty information: To receive the 12-year unit replacement limited warranty and 12-year parts limited warranty, online registration must be completed within 60 days of installation. Additional requirements for annual maintenance are required for the unit replacement limited warranty. Online registration and some of the additional requirements are not required in California or Quebec.

Special installation requirements: When properly an- chored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available).

Contact: Daikin North America LLC, 713-861-2500; www.daikincomfort.com.

eProduct 186

Footprint (in inches): 29 (length) by 18-25 (width) by 35 (height)

Serviceability features: Cabinet sizes have been reduced from 40 to 34 ½ inches and cabinet widths have also been reduced on some sizes. Factory-installed trap for vertical applications. Vertical gas valve for easy connection to either side of the cabinet. Air inlet connections available on top or on either side. Tool-less service access doors include thumb screws. Self-diagnostic control board includes constant memory fault code history.

Technical support: Contact local distributor or call 888-593-9988, option 5, 7 a.m. to 7 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Variable-speed ECM and induced draft motors allow for quiet ramp up and down operation. Fully insulated heat exchanger and blower section also provide noise attenuation.

IAQ equipment supported: Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier. Compatible with all Clean Comfort IAQ products. Auto-comfort and enhanced dehumidification modes available. New cabinet wrapper design provides less than 2 percent cabinet leakage with all models. All models comply with California Low NOx emissions standards.

Thermostat compatibility: Compatible with most thermostats. ComfortNet compatible.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Award-winning, unique, primary heat exchanger design. Heavy-duty, stainless steel, tubular heat exchanger with stainless steel secondary heat exchanger. Self-calibrating modulating gas valves auto-configure for each installation. Durable silicon nitride igniters. Embossed, single-piece cabinet wrapper provides increased cabinet strength.

Warranty information: Twelve-year unit replacement, limited lifetime heat exchanger (good for as long as customer owns home), and 12-year parts limited warranties with online registration if completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: Manufacturer did not specify.

Contact: Daikin North America LLC, 713-861-2500; www.daikincomfort.com.

eProduct 187

Footprint (in inches): 30 (length) by 14-25 (width) by 35 (height)

Serviceability features: Sturdy knobs allow service technicians to remove and replace furnace doors with a twist of the wrist. An LED makes diagnostic flash codes easier to read. Blower assembly is mounted on rails for easy, upfront installation and removal. The display allows technicians to see latest stored fault codes, even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.godayandnight.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.godayandnight.com.

Noise-reduction features: The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Day & Night furnaces can control relative humidity during cooling operations. These furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed for four-way multi-position installation, just 35 inches tall, and light in weight. Comes with ECM blower that can deliver an increase in cooling efficiency when paired with select Day & Night condensing units and evaporator coils. Meets low NOx emissions standards.

Warranty information: One-year no-hassle-replacement parts limited warranty. Lifetime heat exchanger warranty and 10-year parts warranty limited to original purchaser with timely registration. Parts limited warranty period is 20 years for the heat exchanger and five years for parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.godayandnight.com.

eProduct 188

Footprint (in inches): 31-43 (length) by 47 (width) by 44-53 (height)

Serviceability features: Installs easily on rooftop or ground level. Three panels allow easy access for maintenance and installation. Easily converts to down-discharge applications.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.godayandnight.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.godayandnight.com.

Noise-reduction features: Includes two-stage Copeland scroll compressor, which operates most of the time in the quiet, low stage. Also includes a two-stage heating system that offers similar comfort benefits in the heating mode. Outdoor fan is sized and optimized for minimal noise.

IAQ equipment supported: Dehumidification mode (airflow reduction) comes standard on all models. Accessory filter racks support 2-inch filters.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Units feature two-stage heating and cooling operation, stainless steel tubular heat exchangers, field-convertible airflow, and high-efficiency ECM indoor blowers. With cooling efficiencies up to 16 SEER and 12.5 EER, the PGR5 package units are Energy Star-qualified.

Warranty information: Five-year, no-hassle-replacement limited warranty. Lifetime heat exchanger and 10-year parts warranty limited to original purchaser with timely registration. Parts limited warranty period is 20 years for the heat exchanger and five years for parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.godayandnight.com.

eProduct 189

Footprint (in inches): 13 (length) by 18 (width) by 28 (height)

Serviceability features: Inducer fan and gas valve modulate for operation between 33-100 percent of capacity for fuel economy. Chimney or horizontal vent, advanced controls, digital display with temperature indication, diagnostics, and status symbols showing heating mode, burner on, and burner modulation level. Includes a durable, lightweight, one-piece steel jacket.

Technical support: Available 8 a.m. to 5 p.m. Eastern time, Monday to Friday.

Technical support materials: Installation, operation, and maintenance manuals.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: Manufacturer did not specify.

Warranty information: Ten-year limited copper heat exchanger and two-year limited parts.

Special installation requirements: Manufacturer did not specify.

Contact: ECR Intl., 315-797-1310; www.ecrinternational.com.

eProduct 190

Footprint (in inches): 28 (length) by 24 (width) by 26 (height)

Serviceability features: Includes an internally mounted ready-to-connect desuperheater, reducing overall installation time and cost. The SCW model features a brazed plate, double-wall heat exchanger for connection to hot and chilled water systems. All models include on-board Earth Loop Protection (EPS) and factory-installed Sure Start device.

Technical support: Available 8 a.m. to 5:30 p.m. Eastern time. Authorized dealers have access to weekend and after-hours technical support.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Features a fully insulated, galvanized steel, powder-coated cabinet and vibration isolation of key components. The system’s simpler design has fewer components with no water pump and no extra heat exchanger, resulting in a quiet operation.

IAQ equipment supported: Comfort-focused system with consistent home temperature security. With geothermal technology, a home’s air quality is kept at the highest standard by Energy Star’s efficiency standards and without the drying-air effect of water-based heating options.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed to provide 100 percent of heating and cooling needs without the need for a supplemental heating system. Offering comfort, quiet operation, peace of mind, tax credits, and cost savings, the EarthLinked Renewable Energy System provides a simple and efficient method of heating and cooling.

Warranty information: Ten-year major parts and five-year labor allowance.

Special installation requirements: Small yard requirements. Nine different earth-loop system configurations in horizontal, vertical, and diagonal configurations offer dealers greater flexibility. No flammable or toxic antifreeze required. No messy flush carts are necessary. The Earth Loop Protection System and Sure Start mechanisms are standard features in all EarthLinked S-model units.

Contact: EarthLinked Technologies, 866-211-6102; www.earthlinked.com.

eProduct 191

Footprint (in inches): Manufacturer did not specify.

Serviceability features: All units are serviceable from the front or bottom of the unit, depending on the model.

Technical support: Available at 214-388-5751, 8 a.m. to 5 p.m. Central time, Monday to Friday.

Technical support materials: Installation, operation, and maintenance manuals; parts list; and specification sheets included.

Noise-reduction features: Ultra-quiet design.

IAQ equipment supported: Aqua-Therm is used for mulitfamily space heating. ECM technology is also available for even greater energy savings.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The units are especially designed for standard DX cooling and space heating using tankless water heaters.

Warranty information: One-year standard parts replacement.

Special installation requirements: Standard installation where space saving is needed.

Contact: First Co., 214-388-5751; www.firstco.com.

eProduct 192

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Features make installation easier and quicker. Unique mounting brackets have holes 16 inches apart for secure installation on wall studs and level-line ledges for a straight wall mount. The indoor unit was designed with a standoff bracket, spacious tubing area, and low installation access panel for hassle-free setup.

Technical support: Available 8 a.m. to 5 p.m. Central time, Monday to Friday, at 800-541-6645 ext. 263.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Quiet operation is achieved through a design featuring a brushless direct current (BLDC) fan motor for smoother and quieter electrical and mechanical operation, a low-vibration twin-rotary compressor, and powerful cross-flow fan.

IAQ equipment supported: Washable antimicrobial air filters alleviate the potential for harmful mold and mildew.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Enjoy the flexibility to mix and match 9,000-, 12,000-, and 18,000-Btu wall-mounted heat pumps to exactly fit the application. Friedrich’s units are engineered and built with features for comfort and convenience year-round. Other advantages include seven-day programmability and DiamonGold advanced corrosion protection.

Warranty information: Seven-year compressor and five-year parts warranties.

Special installation requirements: Manufacturer did not specify.

Contact: Friedrich Air Conditioning Co., 210-546-0500; www.friedrich.com.

eProduct 193

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Features make installation easy and quick. Unique mounting brackets have holes 16 inches apart for secure installation on wall studs and level-line ledges for a straight wall mount. The indoor unit was designed with a standoff bracket, spacious tubing area, and low-installation access panel for hassle-free set up.

Technical support: Available 8 a.m. to 5 p.m. Central time, Monday to Friday, at 800-541-6645 ext. 263.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Quiet operation is achieved through a design featuring a brushless direct current (BLDC) fan motor for smoother and quieter electrical and mechanical operation; a low-vibration, twin-rotary compressor; and powerful cross-flow fan.

IAQ equipment supported: Washable antimicrobial air filters and an auto dry mode that runs for a defined period of time in order to dry indoor coil moisture and alleviate the potential for harmful mold and mildew.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The HM12YJ is Friedrich’s most efficient unit and is designed with features for comfort and convenience year-round. Other features include auto changeover between heating and cooling, seven-day programmability, and DiamonGold advanced corrosion protection.

Warranty information: Seven-year compressor and five-year parts warranties.

Special installation requirements: Manufacturer did not specify.

Contact: Friedrich Air Conditioning Co., 210-546-0500; www.friedrich.com.

eProduct 194

Footprint (in inches): 31 (length) by 31 (width) by 34 (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Diagnostic LEDs on defrost board. Externally accessible service ports for quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Swept-wing fan blades and composite base pan come standard.

IAQ equipment supported: Supports all standard IAQ products, including zoning components, air cleaners, UV lights, and humidity controls.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: All-aluminum, corrosion-resistant microchannel condenser coil and hot gas bypass valve equipped.

Warranty information: Five-year limited parts warranty is upgraded to 10-year limited parts with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement warranty with product registration.

Special installation requirements: Must be installed with microchannel evaporator coil.

Contact: Nordyne, 800-422-4328; www.frigidaire.net.

eProduct 195

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Easy access to the evaporator coil for cleaning and maintenance. Externally accessible service ports for quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Swept-wing fan blade combined with fixed-speed ECM and custom-made orifice in a one-piece top assist quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Achieves 95 percent AFUE, and microchannel coil technology provides superior corrosion resistance. Energy-efficient ECM provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application.

Warranty information: Five-year limited parts warranty is upgraded to 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement warranty with product registration.

Special installation requirements: Unique condensate removal process requires no internal traps. Horizontal and downflow drain kits are available.

Contact: Nordyne, 800-422-4328; www.frigidaire.net.

eProduct 196

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Active display front panel with safety lockout; one-touch startup smart desuperheater; third-stage, heat-disable, 100 percent, front-access, stainless steel, brazed-plate heat exchangers (BPHX); high- and low-access valves; access ports; thermostatic expansion valve; factory supplied 1-inch-thick filter rack; EZ Clean filter; R-410A zero-ozone depletion refrigerant; and ECM blower.

Technical support: Available 24 hours a day, every day, at 618-664-9010.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: High heating capacity, Copeland UltraTech two-stage scroll compressor, Tru Balance technology, and exceptional climate and humidity control.

Warranty information: Entire geothermal unit is warrantied against defects in materials and workmanship for 10 years from the date of installation. Service labor allowance is for five years for servicing, removing, or reinstalling parts for the refrigerant circuit, steel cabinets, or for any defect in materials and workmanship. Extended parts-only warranty option covers the original owner for the compressor and aluminum microchannel air coil for the life of the unit beginning in year 11. This option requires original warranty registration.

Special installation requirements: Manufacturer did not specify.

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 197

Footprint (in inches): 29 (length) by 32 (width) by 23 (height)

Serviceability features: Easy-access UV-protected outdoor cabinet, back-seating service valves with service ports, and digital controls included. Equipped with an outdoor installation kit with freeze protection built in for pump control. Heat exchanger composed of copper or optional cupronickel. Side-mount flow-center connection available, and the unit’s standard flow is center.

Technical support: Available 24 hours a day, every day, at 618-664-9010.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Foamed-in water-to-refrigerant coaxial heat exchanger prevents condensation, which can lead to premature failure. The foam shell also absorbs noise and vibration from the compressor, making the unit even quieter. Triple compressor isolation (two sets of high-density steel rails plus rubber grommets) provides sound/vibration absorption. This also allows refrigeration piping to be routed under the coax in case of service or replacement.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The UV powder-coated cabinet maintains aesthetics for years. The removable lid makes component access, installation, troubleshooting, or service a snap. Backseating service valves ease installation and activation. An oversized, rifled coaxial water heat exchanger offers increased surface area, which provides highly efficient performance.

Warranty information: The entire geothermal unit is warrantied against defects in materials and workmanship for 10 years from the date of installation. Service labor allowance is for five years for servicing, removing, or reinstalling parts for the refrigerant circuit, steel cabinets, or any defect in materials and workmanship. An extended parts-only warranty option covers the original owner for the compressor and aluminum microchannel air coil for the life of the unit beginning in year 11. This option requires original warranty registration.

Special installation requirements: All RT models ship from the factory with everything needed for installation except the unit pad and flow center, including the flow-center cover, aluminum pipe shield, pre-assembled hose kit with P/T ports, pump wiring harness, and PE 90-degree street elbows.

Contact: Enertech Global LLC, 618-664-9010; www.enertechgeo.com.

eProduct 198

Footprint (in inches): 32 (length) by 26 (width) by 50 (height)

Serviceability features: LED fault and status lights on the Aurora board feature memory for easy diagnostics. Aurora AID tool provides enhanced service information via communication directly with the Aurora control, including sensor inputs, fault history, and more. Aurora AID tool port on the exterior of the unit offers diagnostics and troubleshooting without even opening the unit.

Technical support: Available at 800-257-5667.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and submittal materials included.

Noise-reduction features: Features include double-isolation-mounted compressors and soft-starting blower motors, insulated compressor compartment, interior cabinet insulation using ½-inch coated glass fiber, and all units include compressor blanket for quiet operation.

IAQ equipment supported: Comes standard with a 2-inch MERV 11 filter with a 4-inch Alpine Pure option. Electrostatic air filters and electronic air cleaners are also compatible.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Combines forced-air heating and air conditioning and generates a portion of a home’s hot water, all from a single unit. Available in nine single-speed and six dual-capacity sizes from 1-6 ton; the geothermal heat pump system uses R-410A refrigerant and features options for performance, energy, and system monitoring along with online communication.

Warranty information: Ten-year parts and labor allowance.

Special installation requirements: None.

Contact: GeoStar, 260-478-5667; www.geostar-geo.com.

eProduct 199

Footprint (in inches): 36 (length) by 36 (width) by 38 (height)

Serviceability features: Includes built-in, expanded ComfortAlert diagnostics and diagnostic indicator lights. Setup capable with two low-voltage wires to outdoor unit. Memory allows storage of six fault codes. Color-coded terminal strip for noncommunicating set up. Factory-installed bi-flow liquid line filter drier, suction line accumulator, crankcase heater, high-capacity muffler, coil and ambient temperature sensors, and high- and low-pressure switches.

Technical support: Contact local distributor or call 888-593-9988, option 5, 7 a.m. to 7 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Unique sound control top design. The two-stage Copeland UltraTech scroll compressor is covered with a high-density sound blanket. A quiet, two-speed, ECM-style condenser fan included.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy-efficient 5-millimeter condensing coil design in some models. ComfortNet communications system features Internet compatibility. SmartShift defrost technology with short-cycle protection ensures quiet, reliable defrost. Steel-louvered coil guard adds protection. Baked-on powder paint provides a lasting finish. Air-Conditioning, Heating, and Refrigeration Institute (AHRI)-certified; ETL-listed.

Warranty information: Limited ten-year unit replacement warranty, lifetime compressor warranty limited (good for as long as customer owns home), and 10-year parts warranty limited with online registration completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available).

Contact: Goodman Mfg. Co. LP, 713-861-2500; www.goodmanmfg.com.

eProduct 200

Footprint (in inches): 29 (length) by 18-25 (width) by 35 (height)

Serviceability features: Cabinet sizes have been reduced from 40 to 34 ½ inches, and cabinet widths have also been reduced on some sizes. Factory-installed trap for vertical applications and a vertical gas valve provide easy connection to either side of the cabinet. Air inlet connections available on top or either side. Tool-less service access doors feature thumb screws. Self-diagnostic control board offers constant memory fault code history.

Technical support: Contact local distributor or call 888-593-9988, option 5, 7 a.m. to 7 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Variable-speed ECM and induced draft motors for quiet ramp up and down operation. Fully insulated heat exchanger and blower section provides noise attenuation.

IAQ equipment supported: Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier. Compatible with all Clean Comfort IAQ products. Auto-Comfort and enhanced dehumidification modes available. New cabinet wrapper design provides less than 2 percent cabinet leakage with all models. All models comply with California Low NOx emissions standards.

Thermostat compatibility: Compatible with most thermostats, including ComfortNet.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Award-winning, unique primary heat exchanger design. Heavy-duty stainless steel tubular heat exchanger and stainless steel secondary heat exchanger come standard. Self-calibrating, modulating gas valves auto-configure for each installation. Durable silicon nitride igniters and embossed, single-piece cabinet wrapper provides increased cabinet strength.

Warranty information: Ten-year limited unit replacement warranty, lifetime limited heat exchanger warranty (good for as long as customer owns home), and 10-year limited parts warranty with online registration completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: Manufacturer did not specify.

Contact: Goodman Mfg. Co. LP, 713-861-2500; www.goodmanmfg.com.

eProduct 201

Footprint (in inches): 32 (length) by 11 (width) by 27 (height)

Serviceability features: Easy installation clipper, flexible refrigerant piping, two-way pipe drain, and double-digit LED error code display make service much easier.

Technical support: Available at 877-337-3639, 8 a.m. to 8 p.m. Eastern time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; and specification sheets included.

Noise-reduction features: Equipped with advanced fan blade and blower design, quiet compressor, integrated construction design, and double-isolation chassis.

IAQ equipment supported: Advanced dehumidification control. Healthy filters including bacteria-killing medium filter, Vitamin C layer filter, photocatalyst filter, and activated carbon filter.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Low ambient cooling down to 0?F and low ambient heating down to 5?. dc inverter-driven compressor and the unit offers 40-feet-plus air throw.

Warranty information: Five-year parts-only warranty and seven-year compressor-only warranty.

Special installation requirements: Ductless training required.

Contact: Haier, 212-594-3330; www.haier.com.

eProduct 202

Footprint (in inches): 8 (length) by 29 (width) by 24 (height)

Serviceability features: Access doesn’t require a ladder to reach the indoor unit. Easy access to air filters. Connections are made on the front of the unit, providing easy access to flare connections. From mobile devices, contractors can download the Fujitsu Mobile Technician App, where they can view error codes and determine troubleshooting steps.

Technical support: Available at 866-952-8324, 8 a.m. to 8 p.m. Eastern time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and Fujitsu Mobile Technician App available.

Noise-reduction features: Features an indoor unit as quiet as 23 dB. The outdoor unit is 50 dB.

IAQ equipment supported: Ion deodorization filters decompose absorbed odors using the oxidizing/reducing effects of ions generated by the ultra-fine-particle ceramic, and Apple-Catechin filters absorb fine dust, invisible mold spores, and harmful microorganisms onto the filter by static electricity, inhibiting and deactivating further growth. Three-year life expectancy. Simply wash to restore surface action.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The 26-SEER unit features low-temperature heating at outdoor temperatures down to minus 15°F, twin airflow for improved heat delivery, a programmable remote control, and inverter technology. The outdoor unit features a base heater preventing condensate from freezing.

Warranty information: For systems that are installed and commissioned by a qualified contractor, five-year parts and seven-year compressor warranty. See the warranty statement for full details.

Special installation requirements: Units have to be installed within 66 feet of each other.

Contact: Fujitsu General America Inc., 973-575-0380; www.fujitsugeneral.com.

eProduct 203

Footprint (in inches): 30 (length) by 18-25 (width) by 35 (height)

Serviceability features: These new gas furnaces feature large, one-quarter-turn knobs for easy door installation and removal. An LED makes diagnostic flash codes easier to read. Blower assembly is mounted on rails for easy, upfront installation and removal. The unit allows technicians to see the last seven stored fault codes, even if power is interrupted.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.goheil.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.goheil.com.

Noise-reduction features: Variable-speed ECM blower reduces operating sound levels. Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger and blower compartments.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Heil furnaces can control relative humidity during cooling operation. The furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Requires a special thermostat. For self-configuring control to function, must use with Heil Observer communicating wall control (thermostat).

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Featuring a communicating control, these furnaces are built with stainless steel secondary heat exchangers. Modulating (multistage) gas valves allow furnaces to operate on a quiet low-heat setting unless the thermostat calls for more heat. Designed for four-way, multi-position installation; just 35 inches tall and light in weight.

Warranty information: Ten-year no-hassle-replacement limited warranty. Lifetime limited heat exchanger and 10-year parts limited warranties to original purchaser with timely registration. Limited parts warranty period is 20 years for the heat exchanger and five years for parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goheil.com.

eProduct 204

Footprint (in inches): 31-43 (length) by 47 (width) by 44-53 (height)

Serviceability features: Installs easily on rooftop or ground level. Three panels allow easy access for maintenance and installation. Easily converts to down-discharge applications.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.goheil.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.goheil.com.

Noise-reduction features: Includes two-stage Copeland scroll compressor, which operates most of the time in the quiet, low stage. Also includes a two-stage heating system that offers similar comfort benefits in the heating mode. Outdoor fan is sized and optimized for minimal noise.

IAQ equipment supported: Dehumidification mode (airflow reduction) is standard on all models. Accessory filter racks support 2-inch filters.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Units feature two-stage heating and cooling operation, stainless steel tubular heat exchangers, field-convertible airflow, and high-efficiency ECM indoor blower. With cooling efficiencies up to 16 SEER and 12.5 EER, the PGR5 package units are Energy Star-qualified.

Warranty information: Five-year no-hassle-replacement limited warranty. Lifetime limited heat exchanger and 10-year limited parts warranty to original purchaser with timely registration. Limited parts warranty time period is 20 years for the heat exchanger and five years for parts, if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.goheil.com.

eProduct 205

Footprint (in inches): 26 (length) by 23 (width) by 29 (height)

Serviceability features: Front, top, and rear full-panel access. Electronic digital controls with safety lockout, compressor anti-short cycle protection, and diagnostic LED lights. Easy-access high and low refrigeration service ports. Flush mount and external standard national pipe thread (NPT) water connections. Closed- and open-loop heat exchanger options.

Technical support: Available 24 hours a day, every day, at 618-664-9010.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Stainless steel brazed plate heat exchangers (BPHX). Lower weight compared to units with coaxial heat exchangers. Direct NPT connection BPHX for reduced pressure drop. Front, top, and rear access electronic controls with safety lock out provide freeze protection. High- and low-valve access ports included.

Warranty information: With the completed online or mail-in registration form, limited lifetime one-time, parts-only coverage to the original owner for the compressor and aluminum microchannel air coil (MCHX) for the life of the unit. Refrigerant system, including compressor, air coil, expansion valve, and reversing valve, warrantied to be free from defects in material and workmanship for 10 years from the date of installation. The geothermal unit is warrantied against defects in materials and workmanship for 10 years from the date of installation. Service labor warranty allowance for five years on servicing, removing, or reinstalling of parts for the refrigerant circuit, steel cabinets, or for any defects in materials and workmanship. Contact the manufacturer for further details.

Special installation requirements: Manufacturer did not specify.

Contact: Enertech Global, LLC, 618-664-9010; www.enertech geo.com.

eProduct 206

Footprint (in inches): 29 (length) by 32 (width) by 23 (height)

Serviceability features: Easy-access UV-protected outdoor cabinet. Back-seating service valves with service ports. Digital controls, outdoor installation kit, and built-in freeze protection for pump control included. Heat exchanger composed of copper or optional cupronickel. Side-mount flow-center connection, and the unit uses standard flow center.

Technical support: Available 24 hours a day, every day, at 618-664-9010.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Foamed-in water-to-refrigerant coaxial heat exchanger prevents condensation, which can lead to premature failure. The foam shell also absorbs noise and vibration from the compressor, making the unit even quieter. Triple compressor isolation (two sets of high-density steel rails plus rubber grommets) provides sound and vibration absorption. This also allows refrigeration piping to be routed under the coax in case of service or replacement.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The UV powder-coated cabinet maintains its aesthetics for years. The removable lid makes component access, installation, troubleshooting, or service a snap. Backseating service valves ease installation and activation. An oversized, rifled coaxial water heat exchanger for increased surface area provides high efficiencies.

Warranty information: The refrigerant system, including the compressor, air coil, expansion valve, and reversing valve, is warrantied to be free from defects in material and workmanship for a period of 10 years from the date of installation. Compressor and microchannel heat exchanger (MCHX) include a limited lifetime warranty to the original purchaser-user with Enertech’s receipt of the completed online or mail-in registration form. The geothermal unit is warrantied against defects in materials and workmanship for 10 years from the date of installation. Five-year service labor allowance warranty for servicing, removing, or reinstalling parts for the refrigerant circuit, steel cabinets, or for any defect in materials and workmanship. Warranty registration provides an added five-year (years six through 10) service-labor allowance.

Special installation requirements: All RT models ship from the factory with everything needed for installation except the unit pad and flow center, including flow-center cover, aluminum pipe shield, pre-assembled hose kit with P/T ports, pump wiring harness, and PE 90-degree street elbows.

Contact: Enertech Global, LLC, 618-664-9010; www.enertechgeo.com.

eProduct 207

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Access to most components, including the controls, gas valves, blowers, burner, etc., is easy via the front and/or top of the unit. Top or bottom gas and heating connections for flexible installation options help make installations neat.

Technical support: Available 8 a.m. to 5 p.m. Eastern time at 800-900-9276. Regional service managers located across the U.S. and Canada.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Quiet operation.

IAQ equipment supported: The product vents to the outside and does not need filtration into living space like a furnace, which does not impact IAQ. Unit includes low 10-ppm NOx emissions for low impact on outdoor air quality.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Uniquely designed stainless steel heat exchanger; three combi and seven heating sizes; up to 150 feet of vent; top and bottom gas and heating connections; primeless condensate trap; easy-to-use advanced controls; auto-cascade setup for multiple boiler installations; freeze protection; outdoor reset; and anti-short cycling.

Warranty information: Fifteen-year limited warranty with two-year parts and labor guarantee.

Special installation requirements: Converts from natural gas to propane without additional parts. Low water cutoff and circulator included and features ½-inch gas line and vents with polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPV), and polypropylene materials.

Contact: Laars Heating Systems Co., a subsidiary of Bradford White Corp., 603-335-6300; www.laars.com.

eProduct 208

Footprint (in inches): 31 (length) by 20 (width) by 54 (height)

Serviceability features: Includes thoughtful additions, such as strategically placed ports, a removable blower assembly, and removable burner parts to allow for easy cleaning or servicing. A large blower compartment door gives complete service access to the blower, while other compartments can be accessed via a louvered door equipped with a handhold for easy removal. The advanced burner control includes features such as status lights for system monitoring and diagnostics and a pump-priming mode. The flame inspection tube is conveniently located at the front of the unit and is large enough to accommodate a normal inspection mirror.

Technical support: Available at 800-453-6669.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Comes with a variable-speed blower motor, which is housed in a fully insulated compartment for quiet operation.

IAQ equipment supported: Variable-speed motor offers humidity control and enables it to circulate air slowly and evenly in fan mode, filtering the air to remove contaminants over time. Additionally, the unit can facilitate add-ons such as powered air cleaners and humidifiers.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: The cabinet and heat exchanger are constructed with heavy-gauge steel for durability. Features, such as a completely enclosed control compartment, the Beckett burner’s 120-vac primary safety control, and ceramic glazed electrodes deliver added safety and peace of mind. All models come with a specially designed alumina silica ceramic fiber combustion chamber able to withstand temperatures of up to 2,550?F, resulting in more complete combustion and higher efficiencies. Meanwhile, the entire heating section is lined with foil-faced fiberglass insulation to keep cabinet surface temperatures low.

Warranty information: Lifetime limited heat exchanger warranty and 10-year limited warranty covers components.

Special installation requirements: Shipped for lower heating capacity operation. It can be field-converted to a higher heating capacity using the provided larger firing nozzle. A two-stage oil pump is also available as an optional accessory. Local regulations may apply in the installation of oil furnaces. If direction is needed, refer to the installation documents provided or call 800-453-6669.

Contact: Lennox Industries Inc.; www.lennox.com/residential.

eProduct 209

Footprint (in inches): 8 (length) by 48 (width) by 14 (height)

Serviceability features: The front of the unit provides easy access to filters for cleaning and replacing. The optional monitoring view (LGMV) software allows users to connect a USB port to the outdoor unit to troubleshoot and capture data in real time.

Technical support: Available at 888-865-3026, 8 a.m. to 8 p.m. Eastern time, Monday to Friday.

Technical support materials: Installation, operation, and maintenance manuals; specification sheets; and startup instructions included.

Noise-reduction features: To promote a quiet comfortable environment, the single-zone indoor units operate at sound levels as low as 37 dBA in sleep mode and outdoor units as low as 35 dBA. To help reduce undesirable noise, the outdoor unit’s internal components are soft started by the controller to help reduce sounds caused by fans and compressors turning on and off.

IAQ equipment supported: The unit ensures air is passing over cold coils, pulling moisture from the air — even when the room is not being used. By capturing the moisture, the system helps increase the room’s air quality. Its dehumidification mode lowers the humidity in the room.

Thermostat compatibility: Requires an LG thermostat, but it can also use some third-party thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Incorporates advanced technology for cost and energy-efficient operation. Its four-way auto-swing vanes provide even airflow by blowing air in multiple directions. Once the desired temperature is reached, the indoor unit operates at low speeds to help maintain the comfort level.

Warranty information: Up to seven years limited warranty available.

Special installation requirements: LG provides technical support throughout the installation and commissioning process, offering a variety of courses for installers and servicers to help ensure every duct-free system is installed properly.

Contact: LG Electronics Inc., www.lg-dfs.com.

eProduct 210

Footprint (in inches): 33 (length) by 26 (width) by 54 (height)

Serviceability features: Equipped with all-in-one Smart System™ control technology. With a redesigned multicolor LCD interface and new control features, the operating system can directly integrate into a building automation system through Modbus or BACnet. The new CON-X-US remote connectivity option simplifies data acquisition and provides remote diagnostics. Status alerts can be sent to a smart device, and the user can monitor and reprogram control parameters remotely. Each model features zero clearance on both sides and an installed footprint of 6.2 square feet. The unit allows for direct venting up to 100 feet using polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polypropylene, or stainless steel pipe. Multiple units can be common-vented. Water, gas, and venting connections are located on the back of the boiler for easy access, and the hinged top puts all other components and electrical connections in quick reach for simplified service.

Technical support: Available at 800-722-2101 from 8 a.m. to 5 p.m. Central time.

Technical support materials: Installation, operation, and maintenance manuals; parts list; specification sheets; Revit product drawings; and plan view drawings included.

Noise-reduction features: No special sound reduction measures are required as the boiler is whisper quiet.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: The Smart System control is a dedicated circuit board that, among many other functions, acts as the thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Represents a new generation of fire tube technology delivering up to 10:1 turndown and up to 98 percent thermal efficiency. Enabled for CON-X-US remote connect capability. The new Loch-N-Load™ programming feature on the Smart System control allows the user to load proven parameters onto a USB drive and plug the drive into a port on the front panel of the boiler to upload them to the operating system. This shortcut can reduce installation and programming time by up to 30 minutes per boiler. With Smart System’s built-in cascading sequencer, up to eight FTXL units can operate efficiently with total inputs of up to 6.8 MBtuh.

Warranty information: Ten-year limited warranty covers heat exchanger for leakage, thermal shock, or other malfunction caused by defects in materials and/or workmanship. It extends to the first buyer and to any subsequent owner(s) as long as the boiler remains installed at its original place of installation.

Special installation requirements: Manufacturer did not specify.

Contact: Lochinvar LLC, 615-889-8900; www.lochinvar.com.

eProduct 211

Footprint (in inches): Indoor: 36 (length) by 10 (width) by 15 (height); Outdoor: 35 (length) by 14 (width) by 23 (height).

Serviceability features: Maintenance points are located behind easy-access panels, making installation and service a breeze for a trained technician. Flare connection lines are located on the side of the unit cabinet, a fully serviceable brass service valve prevents corrosion and provides access to the system, and a shutoff valve can be fully shut off while two-way service valve may be front-seated to manage refrigerant charge during servicing.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378, 7 a.m. to 5 p.m. Central time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and online documentation, including technical, service manuals, and parts look-up can be found at www.upgnet.com or www.joinluxaire.com.

Noise-reduction features: Twin-rotary inverter compressor on all models features high-efficiency operation that modulates down to 15 Hz and as high as 120 Hz for reduced vibration and quiet operation.

IAQ equipment supported: An advanced multipart filter system accessory uses a catechin material and treated fibers to remove contaminants, such as allergens, to improve IAQ.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The Energy Star-certified mini split fits a variety of areas. The wireless remote controller with a built-in temperature sensor and unique I FEEL function satisfies the temperature set point wherever the remote control is located. In heating mode, the indoor fan is delayed between one to three minutes to allow refrigerant to warm up and avoid cold blow.

Warranty information: Six-year limited compressor and two-year limited parts warranties.

Special installation requirements: There are no special installation requirements. The units are plug-and-play ready.

Contact: Johnson Controls Inc., 414-524-5487; www.joinluxaire.com.

eProduct 212

Footprint (in inches): 30 (length) by 15 (width) by 33 (height)

Serviceability features: The furnaces can be used with the Acclimate communicating control, providing system status updates to homeowners and contractors. The systems can be applied in upflow, horizontal left/right, or downflow installations; provide easy access to connect power/control wiring; and don’t include knockouts, making installation easier. A fully supported blower ensures easy access and removal of the blower.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378, 7 a.m. to 5 p.m. Central time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; technical guide; submittal data sheet; guide specifications; installation instructions; and user’s manual available at www.upgnet.com or by request. A unique quick reference setup guide for contractors is also available.

Noise-reduction features: Quiet, two-stage inducer, burner, and variable-speed ECM blower ensures reduced noise, as does the insulated blower compartment.

IAQ equipment supported: External air filters offer maximum flexibility to meet customer IAQ needs. Variable-speed ECM fans provide more consistent airflow and temperatures and more options for continuous airflow settings, resulting in increased filtration and improved comfort. These furnaces are compatible with all Luxaire premium IAQ products.

Thermostat compatibility: Compatible with most thermostats, including communication-capable thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The furnaces are designed for installation in small spaces, such as basements, closets, alcoves, attics, etc. Communications capability allows the furnace to communicate with all key components of a home comfort system, providing detailed system information to homeowners and contractors. The unit now includes a built-in float switch, outdoor temperature sensor, and auxiliary terminals.

Warranty information: Lifetime limited warranty on both heat exchangers to the original purchaser, and 20-year limited warranty from original installation date to subsequent purchaser. Ten-year heat exchanger warranty on commercial applications and standard five-year limited parts warranty included. Extended 10-year limited parts guarantee when the product is registered online within 90 days of purchase for replacement or closing for new home construction. Unique condensate removal process with no internal traps required.

Special installation requirements: Installation is easy, thanks to design features such as narrow 14 ½-inch width; minimal conversion for upflow, horizontal, or downflow installation; moveable duct connector flanges; no knockouts; internal condensate drain trap; supported blower assembly; venting options; controls access; quarter-turn knobs on doors; and inducer rotation using four screws.

Contact: Johnson Controls Inc., 414-524-5487; www.joinluxaire.com.

eProduct 213

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Easy service available by removing just one screw from the fan panel, which allows access to the impeller and heating element without disturbing any internal wiring or controls.

Technical support: Available 8 a.m. to 4:30 p.m. Eastern time, Monday to Friday, at 800-642-4328.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; and specification sheets included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Has a built-in thermostat.

Replacement parts compatibility: Does not share replacement parts with other models.

Additional features: Dual voltage and wattage ratings help reduce inventory to five SKUs. Available in 120, 208, 240 V and 375, 570, 750, 1,125, 1,500, and 2,000 W. Factory-wired for full wattage and easily field adjustable for half wattage. Patented Clip-N-Fit® allows installer to change the wattage of the heater to a lower output without moving a jumper wire. Each heater is factory wired for its maximum wattage. To change wattage, clip out either jumper 1 or 2 as shown in the installation manual for desired wattage. This patented feature also prevents the operator from changing to a higher wattage after installation.

Warranty information: Warrantied against defects in workmanship and materials for one year from date of installation, except heating elements, which are warrantied for five years from date of installation. This warranty does not apply to damage from accident, misuse, or alteration, nor where the connected voltage is more than 5 percent above the nameplate voltage, nor to equipment improperly installed or wired or maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.

Special installation requirements: Quick installation with heater/fan assembly fitting to back box by one screw. Adaptable for retrofits into 7 7⁄8- by-11 ½-by 4-inch back box. Supplemental heat for any residential and commercial area is appropriate for small rooms or spot heating. Universal size adaptable for retrofit into existing back box and rough-in opening.

Contact: Marley Engineered Products, 843-479-4006; www.marlymep.com.

eProduct 214

Footprint (in inches): 56 (length) by 48 (width) by maximum 47 with base rails (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit, and easy access is offered to the evaporator coil for cleaning and maintenance. Externally accessible service ports provide quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Swept-wing fan blade combined with fixed-speed ECM and custom-made orifice in a one-piece top for quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: This gas pack achieves 95 percent AFUE. Microchannel coil technology provides superior corrosion resistance. Energy-efficient ECM provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application.

Warranty information: Five-year limited parts warranty is upgraded to a 12-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 12-year limited unit replacement warranty with product registration.

Special installation requirements: The unique condensate removal process requires no internal traps. Horizontal and downflow drain kits are available.

Contact: Nordyne, 800-422-4328; www.maytaghvac.com.

eProduct 215

Footprint (in inches): 31 (length) by 31 (width) by 34 (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Externally accessible service ports provide quick access to the refrigeration system. The defrost board features diagnostic LEDs.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wi- ring diagrams; installation, operation, and maintenance manuals; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: The unit is equipped with swept-wing fan blades and a composite base pan.

IAQ equipment supported: Supports all standard IAQ products, including zoning components, air cleaners, UV lights, and humidity controls.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: All-aluminum, corrosion-resistant microchannel condenser coil and hot gas bypass valve included.

Warranty information: Five-year limited parts warranty is upgraded to a 12-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 12-year limited unit replacement warranty with product registration.

Special installation requirements: Must be installed with microchannel evaporator coil.

Contact: Nordyne, 800-422-4328; www.maytaghvac.com.

eProduct 216

Model: Hyper-Heating Inverter™ (H2i®) single-zone heat pump system (MUZ-FH09NA)

Footprint (in inches): 11 (length) by 32 (width) by 22 (height)

Serviceability features: Built-in self-diagnostics direct a technician to a specific issue. Convenient front, side, and top panels allow for straightforward access to serviceable components. Easily accessible filters, no ductwork to keep clean, and simple wiring result in minimal maintenance.

Technical support: Available 8 a.m. to 7 p.m. Eastern time, Monday to Friday, at 800-433-4822.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: The outdoor unit features a sealed, insulated compressor compartment and vibration-dampening feet. The inverter-driven compressor and variable-speed fan unit run at partial speed, offering low sound levels.

IAQ equipment supported: Features a washable, long-life, triple-action filtration system that includes a nano-platinum filter, electrostatic anti-allergen enzyme filter, and a deodorizing filter to improve air quality. The variable fan unit circulates and filters air constantly.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Offers 30.5-SEER efficiency and low ambient heating capabilities. It operates at 100 percent heating capacity at 5?F and Hyper-Heating performance down to minus 13?F. Indoor units feature i-see Sensor™ 3-D technology that detects human heat signatures to deliver air to occupied areas only.

Warranty information: Seven-year compressor and five-year parts (plus two-year additional parts for qualifying Diamond Contractors) warranties available.

Special installation requirements: Please consult the installation manual. The indoor unit is powered from the outdoor unit. All refrigerant lines have flared connections and must be insulated. A base pan heater and stand are recommended for extremely cold climates.

Contact: Mitsubishi Electric US Cooling & Heating Division, 678-376-2900; www.mehvac.com.

eProduct 217

Footprint (in inches): 23 (length) by 26 (width) by 26 (height)

Serviceability features: Equipped with three removable access panels, a performance monitoring package to provide water and air temperatures, and swivel water connections.

Technical support: Available at 877-679-4436 or www.modinehvac.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; troubleshooting guide; and startup instructions included.

Noise-reduction features: Fully insulated cabinets, dual vibration isolation mounted compressors, and ECM fans.

IAQ equipment supported: MERV 13 filters and onboard humidity control come standard.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: For those looking to add geothermal HVAC solutions into new or retrofitted locations, split systems are now available. Both the air handler and condenser sections can be easily installed and are Energy Star-rated when paired together. Five models are available in sizes ranging 2-6 ton. The Orb controller comes standard.

Warranty information: Ten-year parts and five-year labor warranties. An optional five-year labor extension is available.

Special installation requirements: None.

Contact: Modine Mfg. Co., 800-828-4328; www.modinehvac.com.

eProduct 218

Footprint (in inches): 28 (length) by 21 (width) by 34 (height)

Serviceability features: Diagnostic lights offer easy troubleshooting without counting flashes.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www. nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: The blower compartment is sealed to reduce air leakage and is insulated for quiet operation.

IAQ equipment supported: Integrated furnace control board provides connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: ECMs boost cooling efficiency up to one full SEER point. The insulated blower compartment and sealed combustion vestibule provide quiet operation.

Warranty information: Five-year limited parts warranty is upgraded to a 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement warranty with product registration.

Special installation requirements: No.

Contact: Nordyne, 800-422-4328; www.nutonehvac.com.

eProduct 219

Footprint (in inches): 56 (length) by 48 (width) by maximum 47 with base rails (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Easy access also makes evaporator coil for cleaning and maintenance accessible. Externally accessible service ports for quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Swept-wing fan blade combined with fixed-speed ECM and custom-made orifice in a one-piece top for ultra-quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Residential gas pack achieves 95 percent AFUE. Microchannel coil technology provides superior corrosion resistance. Energy-efficient ECM provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application.

Warranty information: Five-year limited parts warranty is upgraded to a 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement warranty with product registration.

Special installation requirements: Unique condensate removal process requires no internal traps. Horizontal and downflow drain kits are available.

Contact: Nordyne, 800-422-4328; www.nutonehvac.com.

eProduct 220

Footprint (in inches): 13 (length) by 34 (width) by 31 (height)

Serviceability features: Mini split has a self-diagnostic auto-check function to alert alarm conditions.

Technical support: Available at 800-851-1235.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Features include high energy-efficiency systems, inverter-driven variable-speed rotary compressor, quiet operation, and quick and easy installation.

Warranty information: One-year parts and six-year compressor warranties.

Special installation requirements: Installation classes are offered free of charge online or at the manufacturer’s training facility.

Contact: Panasonic Air Conditioning Group, 800-851-1235; www.us.panasonic.com/aircon.

eProduct 221

Footprint (in inches): 29 (length) by 14-25 (width) by 33 (height)

Serviceability features: The blower assembly slides out on rails for easy service. Lengthy wiring harness allows technicians to remove blower assembly without disconnecting wires.

Technical support: Support provided through a nationwide network of local distributors.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: An insulated cabinet. Two-stage burner and variable-speed blower motor allow furnace to operate on quieter low fire and low fan speed most of the time.

IAQ equipment supported: As part of an installed system, compatible with air purifiers, humidifiers, ventilators, germicidal UV lamps, and other IAQ products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Multi-position design allows installation in upflow, downflow, or horizontal airflow. Vent pipes can run inside cabinet to allow greater installation flexibility in tight spaces. Variable-speed blower motor and two-stage burner operation help improve homeowner comfort by reducing temperature differences between rooms.

Warranty information: Ten-year limited parts and 20-year limited heat exchanger warranties available to original owners with timely registration. If not registered within 90 days of installation, the limited warranty period is five years. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Payne Heating & Cooling, 888-417-2963; www.payne.com.

eProduct 222

Footprint (in inches): 29 (length) by 14-25 (width) by 35 (height)

Serviceability features: The blower assembly slides out on rails for easy service. Lengthy wiring harness allows technicians to remove blower assembly without disconnecting wires.

Technical support: Support provided through a nationwide network of local distributors.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Insulated cabinet. Two-stage gas valve burner and variable-speed blower motor allow furnace to operate on quieter low fire and low fan speed most of the time.

IAQ equipment supported: As part of an installed system, compatible with air purifiers, humidifiers, ventilators, germicidal UV lamps, and other IAQ products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Four-way, multi-position design allows installation in upflow, downflow, or horizontal airflow. The unit can be vented for direct vent/two-pipe, ventilated combustion air, or single-pipe applications. Variable-speed blower motor and two-stage burner operation help improve homeowner comfort by reducing temperature differences between rooms.

Warranty information: Twenty-year limited heat exchanger and 10-year limited parts warranties available to original purchaser upon timely registration. If not registered within 90 days of installation, the limited warranty period is five years. Please see warranty certificate for details.

Special installation requirements: None.

Contact: Payne Heating & Cooling, 888-417-2963; www.payne.com.

eProduct 223

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Elite Series provides extremely high operating efficiency with extremely low ambient operation (down to minus 25?F) without any additional accessories

Technical support: Available 7:30 a.m. to 6 p.m. Eastern time (other times available) at 855-774-3466, option 1.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Superior noise reduction through the use of sound attenuation, insulation, and advanced fan motor control.

IAQ equipment supported: Options include Pridiom’s exclusive Aqua-Krome Gold coating on the indoor coil to shed water and inhibit the chance for biological growth. The system also has a self-cleaning feature and advanced air filtration.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The unit is equipped with low ambient heating and cooling, right-left louver control with the remote, refrigerant leak detection, Follow Me 1-W stand-by, silent mode cold weather hold (hold the temperature at 46?F), Aqua-Krome Gold, and an auto-changeover option.

Warranty information: Five-year compressor, three-year parts, and one-year labor warranties. All warranties are handled directly between the licensed HVAC contractor and Pridiom’s technical service department.

Special installation requirements: Manufacturer did not specify.

Contact: Pridiom Group, 855-774-3466; www.pridiom.com.

eProduct 224

Footprint (in inches): 29 (length) by 14-25 (width) by 34 (height)

Serviceability features: Like models in the 90 percent-plus line, these units feature a seven-segment LED display. The display is alphanumeric, so contractors can quickly reference an error code. All two-stage, variable-speed units feature a dual seven-segment display, which simplifies readability. In addition, all units have a QR code that allows the dealer to access all product information from a smartphone or tablet.

Technical support: Rheem’s contractor portal, www.myrheem.com, provides information, such as literature, spec sheets, etc. For additional information, call 479-648-6237, 8 a.m. to 5 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Most models in this line have insulated cabinets to help reduce noise. Only R801S units do not have this insulation.

IAQ equipment supported: Whole House Exact Fit media air cleaners can be installed separately to address IAQ concerns in a home.

Thermostat compatibility: Compatible with most thermostats. For optimal performance, a two-stage thermostat is recommended for two-stage heating products and the EcoNet control center for two-stage, variable-speed units.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The gas furnaces use direct spark ignition, which is the same system used on commercial HVAC products, residential gas ovens, and stoves. The seven-segment LED display is designed to assist on service calls.

Warranty information: Conditional five-year parts warranty expands to 10 years if the homeowners register their unit. Heat exchanger warranty ranges from 20 years to lifetime, depending on the unit.

Special installation requirements: Follows standard installation practices. Venting is backward compatible.

Contact: Rheem Mfg. Co.; www.rheem.com.

eProduct 225

Footprint (in inches): 29 (length) by 14-25 (width) by 34 (height)

Serviceability features: These units feature a seven-segment LED display. The display is alphanumeric, so contractors can easily reference an error code. All two-stage, variable-speed units in this platform include a dual seven-segment display, which makes readability even easier. In addition, all units have a QR code that allows the dealer to access all product information from a smartphone or tablet.

Technical support: Ruud’s contractor portal, www.myruud.com, provides information, such as literature, spec sheets, etc. For more information, call 479-648-6237, 8 a.m. to 5 p.m. Central time, Monday to Friday.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: The majority of models have insulated cabinets to help reduce noise.

IAQ equipment supported: Whole House Exact Fit media air cleaners can be installed separately to address IAQ concerns in a home.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The seven-segment LED display is a unique feature that makes error codes easily readable, which should greatly help on service calls. The gas furnaces use direct spark ignition, which is the same system used on commercial HVAC products, residential gas ovens, and stoves.

Warranty information: Conditional five-year parts warranty expands to 10 years if homeowners register their units. Heat exchanger warranty ranges from 20 years to lifetime, depending on the unit.

Special installation requirements: The unit follows standard installation practices and venting is backward compatible.

Contact: Ruud, www.ruud.com.

eProduct 226

Footprint (in inches): 10 (length) by 11 (width) by 23 (height)

Serviceability features: Equipped with easy access to filters and wiring, self-diagnostic with error codes, and smart installation. (System checks for common problems associated with startup. Problems indicated via error codes.)

Technical support: Available at 888-699-6067, 8 a.m. to 5 p.m. Eastern time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: The compressor blanket insulation and swept-wing condensing unit fan blade come standard.

IAQ equipment supported: Three-care filter is specially coated to prevent allergens, viruses, and bacteria contamination. Filter also removes dust from the air.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Unique triangle design allows for ultimate performance, more airflow, and longer air throw. Smart inverter compressor, full air filtration, and triple protector plus (prevents compressor power surges and damage from fluctuating electrical currents) available.

Warranty information: Seven-year compressor, five-year parts, and one-year limited labor warranties.

Special installation requirements: Unique indoor-unit mounting bracket and panel design allows easy access to wiring and refrigeration connections while the unit is mounted on the wall. Both line sets need to be insulated. Two-shielded wire communication between indoor/outdoor.

Contact: Samsung, 562-699-6066; www.samsungcomfort.com.

eProduct 227

Footprint (in inches): 28 (length) by 21 (width) by 34 (height)

Serviceability features: Diagnostic lights for easy troubleshooting without counting flashes.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www. nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: The blower compartment is sealed to reduce air leakage and insulated for quiet operation.

IAQ equipment supported: Integrated furnace control board provides connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: ECMs boost cooling efficiency up to one full SEER point. Easy servicing thanks to smarter diagnostic lights — no need to count flashes. Insulated blower compartment and sealed combustion vestibule provides quiet operation.

Warranty information: Five-year limited parts warranty is upgraded to a 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to a 10-year limited unit replacement warranty with product registration.

Special installation requirements: No.

Contact: Nordyne, 800-422-4328; www.tappan.net.

eProduct 228

Footprint (in inches): 56 (length) by 48 (width) by max. 47 with base rails (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Easy access simplifies evaporator coil for cleaning and maintenance. Externally accessible service ports for quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Swept-wing fan blade combine with fixed-speed ECM and custom-made orifice in a one-piece top provide quiet operation.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Residential gas pack achieves 95 percent AFUE. Microchannel coil technology provides superior corrosion resistance. Energy-efficient ECM provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application.

Warranty information: Five-year limited parts warranty is upgraded to a 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to a 10-year limited unit replacement warranty with product registration.

Special installation requirements: Unique condensate removal process requires no internal traps. Horizontal and downflow drain kits are available

Contact: Nordyne, 800-422-4328; www.tappan.net.

eProduct 229

Footprint (in inches): 30 (length) by 14-25 (width) by 35 (height)

Serviceability features: An LED makes diagnostic flash codes easier to read. The unit allows technicians to see the last seven stored fault codes, even if power is interrupted. Blower assembly is mounted on rails for easy, upfront installation and removal. The gas furnaces feature large, robust, one-quarter-turn knobs for easy door installation and removal.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.gotempstar.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.gotempstar.com.

Noise-reduction features: Quiet, variable-speed ECMs minimize operating sound levels. The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.

IAQ equipment supported: When coupled with a condensing unit and humidity-capable thermostat, mainline Tempstar furnaces can control relative humidity during cooling operation. The furnaces have a dehumidification function in cooling mode and can control a humidifier accessory in heating mode.

Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring function only available when used with Tempstar Observer communicating wall control (thermostat).

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Featuring a communicating control, F9MVE furnaces are built with stainless steel secondary heat exchangers. Compatible with two-stage heat and two-stage cooling, the furnace has an ECM variable-speed blower, which is designed for four-way multi-position installation. The unit stands 35 inches tall and is light in weight. Meets low NOx emissions standards.

Warranty information: Ten-year no-hassle-replacement limited warranty. Lifetime heat exchanger and 10-year limited parts warranty available to original purchaser with timely registration. Parts limited warranty period is 20 years for the heat exchanger and five years for parts if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gotempstar.com.

eProduct 230

Footprint (in inches): 30 (length) by 14-25 (width) by 35 (height)

Serviceability features: Furnace is equipped with easy-to-remove panels and innovative knobs to allow easy door removal and secure attachment. An LED makes diagnostic flash codes easier to read. For servicing convenience, the entire blower assembly and heat exchanger are mounted on slide-out rails.

Technical support: Technical service advisor on staff at local distributors is available with technical assistance and troubleshooting. Technical training is available 24/7/365 online at www.gotempstar.com and at field schools held at participating distributor locations nationwide.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and product information posted online at www.gotempstar.com.

Noise-reduction features: Special blower mount quiets vibration and cuts sound. Cabinet insulation absorbs sound from heat exchanger compartment.

IAQ equipment supported: Versatile 24- and 115-V connections allow for easy attachment of electronic air cleaners (115-V) and humidifiers (24- and 115-V).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Four-position installation capability. Dual-certified for one- or two-pipe installation procedures; features single-stage gas valve and ignition control; and includes durable silicon nitride igniters that last longer, can withstand high-line voltage, and don’t require voltage regulators. Meets low NOx emissions standards. High temperature limit control prevents overheating and the unit includes an internal condensate drain system.

Warranty information: Twenty-year limited heat exchanger warranty and 10-year limited parts warranty available to original purchaser with timely registration. Parts limited warranty period is five years if not registered within 90 days of installation (see warranty certificate for details and restrictions).

Special installation requirements: None.

Contact: International Comfort Products, 800-315-4370; www.gotempstar.com.

eProduct 231

Footprint (in inches): 29 (length) by 32 (width) by 23 (height)

Serviceability features: Easy-access UV-protected outdoor cabinet. Back-seating service valves equipped with service ports. Other features include digital controls, an outdoor installation kit, and built-in freeze protection for pump control. Heat exchangers are built of copper or optional cupronickel. Side-mount flow-center connection included, and the unit uses standard flow center.

Technical support: Available 24 hours a day, every day, at 618-664-9010.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Foamed-in water-to-refrigerant coaxial heat exchanger prevents condensation, which can lead to premature failure. The foam shell also absorbs noise and vibration from the compressor, making the unit even quieter. Triple compressor isolation (two sets of high-density steel rails plus rubber grommets) provides sound/vibration absorption. This also allows refrigeration piping to be routed under the coax in case of service or replacement.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The UV powder-coated cabinet maintains aesthetics for years. The removable lid makes component access, installation, troubleshooting, or service a snap. Backseating service valves ease installation and activation. An oversized, rifled coaxial water heat exchanger offers increased surface area, providing high efficiencies.

Warranty information: The refrigerant system, which includes the compressor, condenser, evaporator, expansion valve, and reversing valve, is warrantied to be free from defects in material and workmanship for a period of five years from the date of installation. The geothermal unit is warrantied against defects in materials and workmanship for five years from the date of installation. Service-labor warranty allows five years for servicing, removing, or reinstalling parts for any defect in materials and workmanship. Extended warranty options available to cover the entire unit, all parts, select accessories, and the compressor, plus labor allowance for 10 years from the date of installation.

Special installation requirements: All RT models ship from the factory with everything needed for installation except the unit pad and flow center, including flow-center cover, aluminum pipe shield, pre-assembled hose kit with P/T ports, pump wiring harness, and PE 90-degree street elbows.

Contact: Enertech Global, LLC, 618-664-9010; www.enertechgeo.com.

eProduct 232

Footprint (in inches): 26 (length) by 23 (width) by 29 (height)

Serviceability features: Front, top, and rear full-panel access. Equipped with electronic digital controls with safety lockout, compressor anti-short-cycle protection, and diagnostic LED lights. Features easy-access high and low refrigeration service ports, flush mount and external standard national pipe thread (NPT) water connections, and closed- and open-loop heat exchanger options.

Technical support: Available 24 hours a day, every day, at 618-664-9010.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Stainless steel brazed plate heat exchangers (BPHX). Direct NPT connection BPHX for reduced pressure drop. Front, top, and rear access electronic controls include safety lock out and freeze protection. High and low valve access ports included.

Warranty information: The refrigerant system, including the compressor, condenser, evaporator, expansion valve, and reversing valve, is warrantied to be free from defects in materials and workmanship for a period of five years from the date of installation. The geothermal unit is warrantied against defects in materials and workmanship for five years from the date of installation. Service-labor warranty allows five years for servicing, removing, or reinstalling parts for any defect in materials and workmanship. Extended warranty option available to cover the entire unit, all parts, select accessories, and the compressor, plus labor allowance, for 10 years from the date of installation.

Special installation requirements: Manufacturer did not specify.

Contact: Enertech Global, LLC, 618-664-9010; www.enertechgeo.com.

eProduct 233

Footprint (in inches): 29 (length) by 21 (width) by 33 (height)

Serviceability features: Furnaces are multi-position, supporting all configurations, including upflow, horizontal left and right, and downflow, with minimal conversion necessary. Conversion typically takes less than 10 minutes. Internal condensate trap can easily be configured, reducing the complexity and installation time. The compact 33-inch design fits easily in tight spaces, such as attics, garages, and closets.

Technical support: Available at 800-348-5130 from 8 a.m. to 5 p.m. Eastern time.

Technical support materials: Installation, operation, and maintenance manuals included.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Manufacturer did not specify.

Warranty information: TP9C modulating series and the TG9S single-stage series come with a limited lifetime heat exchanger warranty and 10-year parts warranty. Must be registered online within 90 days of installation or the heat exchanger warranty reverts to 20 years and the parts warranty reverts to five years. TG8S single-stage series comes with a 20-year heat exchanger warranty and 10-year parts warranty. Each must be registered online within 90 days of installation or the parts warranty reverts to five years and the heat exchanger warranty remains at 20 years.

Special installation requirements: Manufacturer did not specify.

Contact: Thermo Products, LLC, 413-279-1981; www.thermopride.com.

eProduct 234

Footprint (in inches): Manufacturer did not specify.

Serviceability features: ComfortLink™ II communicating controls. Backlit communicating display assembly provides system status and alert information and time- and date-stamped system alerts. Features include pump-down mode for heating or cooling operation, single inverter drive for all tonnages, Quick-Sess cabinet, service access and refrigerant connections with full coil protection, and the refrigerant components outside of coil.

Technical support: Contact local distributor.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Equipped with compressor sound jacket and swept-blade fan.

IAQ equipment supported: The CleanEffects whole-house air cleaner provides advanced air filtration that removes up to 99.98 percent of all the particles and allergens from the filtered air for a cleaner, healthier, more comfortable home.

Thermostat compatibility: Needs communicating thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: To provide continuous comfort, the heat pump optimizes its run speed, often at lower outputs, maintaining the temperature to a half degree of the targeted temperature. It works seamlessly with ComfortLink II Control and the XL850 and Nexia™ Home Intelligence, so homeowners can manage their home’s heating remotely with smartphones, tablets, and computers.

Warranty information: Ten-year limited compressor and 10-year limited outdoor coil warranties. Ten-year limited warranty on internal functional parts. If the product is not registered within 60 days of installation, base limited warranty terms will apply. An option to purchase transferability of registered limited warranty is available. Optional extended warranties are available, which can pay for labor and other costs not covered by limited warranty. Warranties are for residential use only.

Special installation requirements: Manufacturer did not specify.

Contact: Trane, an Ingersoll Rand brand, 800-945-5884; www.trane.com/residential.

eProduct 235

Footprint (in inches): Manufacturer did not specify.

Serviceability features: For specialty applications, two designs are available. Both feature crisp modern styling and include easy-to-clean filters and wireless remote controls. High-wall units are available in capacities ranging 7.5-24 MBtuh; floor/ceiling units have capacities ranging 18-24 MBtuh.

Technical support: Contact local distributor.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup instructions included.

Noise-reduction features: Designed for whisper-quiet operation.

IAQ equipment supported: Each system comes complete with a built-in, easy-to-clean air filter. These systems allow owners to not only control the individual temperature of each room but also create a fresher, cleaner indoor environment.

Thermostat compatibility: Specific thermostat options are available.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Each room, or room grouping, is equipped with its own fan blower and thermostat, allowing for individual temperature control. Individual zone scheduling is possible, providing even more control and potential energy savings. With smaller equipment and small-diameter refrigerant pipes, the VRF systems can fit in a wider variety of homes.

Warranty information: Five-year limited warranty.

Special installation requirements: Manufacturer did not specify.

Contact: Trane, an Ingersoll Rand brand, 800-945-5884; www.trane.com/residential.

eProduct 236

Footprint (in inches): 47 (length) by 16 (width) by 42 (height)

Serviceability features: Includes refrigerant-based outdoor inverter units that feature a high SEER rating, making them incredibly energy efficient. The iSeries can operate successfully down to minus 25?F. Units are multi split, and the capacity ranges 1-3.5 ton.

Technical support: Available 7 a.m. to 5 p.m. Central time, Monday to Friday, at 800-527-0896.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; and specification sheets included.

Noise-reduction features: The outdoor unit has sound levels of 40 dB, and the indoor ducted units are lined with closed-cell insulation. Supply tubing is also lined with sound-deadening insulation. The ductless units operate at 23 dB.

IAQ equipment supported: Indoor units can be zoned and work well with add-on humidifiers. Many applications utilize enhanced filtration up to MERV 13.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Multi-split capability — just one outdoor iSeries unit can support several iSeries indoor units (either ducted, ductless, or a combination of both) within a wide range of operating temperatures. Outdoor units have been tested and successfully operated in extreme temperatures ranging from minus 25° to 120°.

Warranty information: Standard one-year parts warranty included. Additional four years available if installed by a Unico-trained contractor.

Special installation requirements: Because of the various options available in designing a Unico system, each installation is unique. Contractors and installers should contact their local representative or call 800-527-0896.

Contact: Unico Inc., 800-527-0896; www.unicosystem.com.

eProduct 237

Footprint (in inches): 32 (length) by 26 (width) by 22 (height)

Serviceability features: Three removable panels for the compressor compartment provide quick access to all internal components. LED fault and status lights on the Aurora board with memory provide easy diagnostics. Aurora AID tool offers enhanced service information via communication directly with the Aurora control including sensor inputs, fault history, and much more.

Technical support: Available at 800-257-5667.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and submittal instructions included.

Noise-reduction features: Features a double isolated compressor mounting to reduce noise and vibration. An optional soft starter reduces startup amperage by up to 60 percent of normal draw to reduce noise.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Indoor splits are engineered for indoor use where an all-in-one unit would be difficult to install, like attics or crawl spaces, and offer an attractive solution for retrofitting existing homes. It also provides an efficient dual-fuel application solution.

Warranty information: Ten-year parts and labor allowance warranty.

Special installation requirements: None.

Contact: WaterFurnace Intl. Inc., 260-478-5667; www.waterfurnace.com.

eProduct 238

Footprint (in inches): 36 (length) by 24 (width) by 27 (height)

Serviceability features: Removable panel for electrical access provides quick access to electrical components. The thermal expansion valve is easily accessible. GeoLink, swivel-type water connections, connect to GeoLink loop pump(s)/3⁄4-inch female pipe thread for open-loop application and factory-installed P/T ports. High- and low-pressure service ports in refrigerant circuit. LED fault and status lights on the Aurora board with memory provide easy diagnostics. Aurora AID tool provides enhanced service information via communication directly with the Aurora control including sensor inputs and fault history. Detachable thermostat connection strip for wiring convenience.

Technical support: Available at 800-257-5667.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and submittal instructions included.

Noise-reduction features: The system is fully insulated for quiet operation with cleanable, foil-backed insulation. Compressors feature a noise reduction blanket for quiet operation. An optional soft starter reduces startup amperage by up to 60 percent of normal draw to reduce noise.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed to be installed outdoors and is designed for homes with limited indoor utility space. By connecting to an indoor air handler (or fossil fuel furnace), the 500RO11 can provide efficient and comfortable cooling and heating for the entire home. It also provides a dual-fuel application solution.

Warranty information: Ten-year parts and labor allowance warranty.

Special installation requirements: None.

Contact: WaterFurnace Intl. Inc., 260-478-5667; www.waterfurnace.com.

eProduct 239

Footprint (in inches): 31 (length) by 31 (width) by 34 (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. The defrost board includes diagnostic LEDs. Externally accessible service ports provide quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Equipped with swept-wing fan blades and a composite base pan.

IAQ equipment supported: Supports all standard IAQ products, including zoning components, air cleaners, UV lights, and humidity controls.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: All-aluminum, corrosion-resistant micro- channel condenser coil and hot gas bypass valve included.

Warranty information: Five-year limited parts warranty is upgraded to a 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement warranty with product registration.

Special installation requirements: Must be installed with microchannel evaporator coil.

Contact: Nordyne, 800-422-4328; www.westinghousehvac.com.

eProduct 240

Footprint (in inches): 56 (length) by 48 (width) by max. 47 with base rails (height)

Serviceability features: Access panels are provided to all controls and the compressor from the side of the unit. Easy access simplifies evaporator coil for cleaning and maintenance. Externally accessible service ports provide quick access to the refrigeration system.

Technical support: Available 8 a.m. to 4:30 p.m. Central time at 800-422-4328. Technical literature is available 24/7 through www.nordyneu.com.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; specification sheets; and startup instructions included.

Noise-reduction features: Swept-wing fan blade combined with fixed-speed ECM and custom-made orifice in a one-piece top for ultra-quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Residential gas pack achieves 95 percent AFUE. Microchannel coil technology provides superior corrosion resistance. Energy-efficient ECM provides 16 field-selectable cooling airflows and 16 field-selectable heating airflows to match any application.

Warranty information: Five-year limited parts warranty is upgraded to a 10-year limited parts warranty with product registration. One-year unit replacement warranty is upgraded to 10-year limited unit replacement warranty with product registration.

Special installation requirements: Unique condensate removal process requires no internal traps. Horizontal and downflow drain kits are available.

Contact: Nordyne, 800-422-4328; www.westinghousehvac.com.

eProduct 241

Footprint (in inches): Indoor: 36 (length) by 10 (width) by 15 (height); Outdoor: 35 (length) by 14 (width) by 23 (height).

Serviceability features: Maintenance points are located behind easy-access panels, making installation and service a breeze for a trained technician. Flare connection lines are located on the side of the unit cabinet, a fully serviceable brass service valve prevents corrosion and provides access to the system, and a shutoff valve can be fully shut off while two-way service valve may be front seated to manage refrigerant charge during servicing.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 between 7 a.m. and 5 p.m. Central time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; startup instructions; and online documentation, including technical, service manuals, and parts look-up can be found at www.upgnet.com or www.yorkhvacdealer.com.

Noise-reduction features: Twin-rotary inverter compressor on all models features high-efficiency operation that modulates down to 15 Hz and as high as 120 Hz for reduced vibration and quiet operation.

IAQ equipment supported: An advanced multipart filter system accessory uses a catechin material and treated fibers to remove contaminants, such as allergens, to improve IAQ.

Thermostat compatibility: Wireless remote controller with a built-in temperature sensor. When the unique I FEEL function is activated, the system satisfies set point temperatures where the remote control is located.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The Energy Star-certified DHPM mini split fits a variety of areas. The wireless remote controller with a built-in temperature sensor and unique I FEEL function satisfies the temperature set point wherever the remote control is located. In heating mode, the indoor fan is delayed between one to three minutes to allow refrigerant to warm up and avoid cold blow.

Warranty information: Six-year limited compressor and two-year limited parts.

Special installation requirements: There are no special installation requirements. The units are plug-and-play ready.

Contact: Johnson Controls Inc., 414-524-5487; www.yorkhvacdealer.com.

eProduct 242

Footprint (in inches): 30 (length) by 15 (width) by 33 (height)

Serviceability features: These furnaces can be used with the Affinity™ communicating control, providing system status updates to homeowners and contractors. The systems can be applied in upflow, horizontal left/right, or downflow installations; provide easy access to connect power/control wiring; and don’t include knockouts, making installation easier. A fully supported blower ensures easy access and removal of the blower.

Technical support: The first level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378, 7 a.m. to 5 p.m. Central time.

Technical support materials: Wiring diagrams; installation, operation, and maintenance manuals; parts list; troubleshooting guide; specification sheets; and startup in- structions included.

Noise-reduction features: Quiet, two-stage inducer, burner, and variable-speed ECM blower operation ensure reduced noise, as does the insulated blower compartment.

IAQ equipment supported: External air filters offer maximum flexibility to meet customer IAQ needs. Variable-speed ECM fans provide more consistent airflow and temperatures and more options for continuous airflow settings, resulting in increased filtration and improved comfort. The unit is compatible with all York premium IAQ products.

Thermostat compatibility: Compatible with most thermostats including communication-capable thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: These furnaces are designed for installation in small spaces, such as basements, closets, alcoves, attics, etc. Communications capability allows the furnaces to communicate with all key components of a home comfort system, providing detailed system information to homeowners and contractors. The units include a built-in float switch, outdoor temperature sensor, and auxiliary terminals.

Warranty information: Lifetime limited warranty on both heat exchangers to the original purchaser and 20-year limited warranty from original installation date to subsequent purchaser. Ten-year heat exchanger warranty on commercial applications. Standard five-year limited parts warranty. Extended 10-year limited parts warranty when product is registered online within 90 days of purchase for replacement or closing for new home construction.

Special installation requirements: Installation is easy thanks to design features such as narrow 14 ½-inch width, minimal conversion for upflow, horizontal, or downflow installation; moveable duct connector flanges; no knockouts; internal condensate drain trap; supported blower assembly; venting options; controls access; quarter-turn knobs on doors; and inducer rotation using four screws.

Contact: Johnson Controls Inc., 414-524-5487; www.yorkhvacdealer.com.

eProduct 243

Publication date: 9/15/2014

Want more HVAC industry news and information? Join The NEWS on Facebook, Twitter, and LinkedIn today!